|
Product Details:
|
| Usage:: | Economical Salt Spray Environmental Test Chamber | Air Pressure:: | 1.00±0.01kgf/cm*cm |
|---|---|---|---|
| Certificate: | ISO/ASTM/CE/UL/ROSH | Design Criteria: | CNS, JIS, K5400, Z2371, ASTM |
| Spray Quantity: | 1.0~2.0 Ml / 80cm2 / Hr | Exterial/Inner Material:: | P.V.C&P.P |
| Test Chamber Temperature: | NSS ACSS 35±1°C CASS:50±1°C | Temperature Precision: | ±1°C |
| Highlight: | salt fog testing,salt spray test machine |
||
Cylinder Salt Mist Test Corrosion Testing
Product image & Description:
Equipment summary:
This Cylinder Salt Mist Test Corrosion Testing is a machine that the testing condition is the closest
to the natural environment, it simulated condition that more often meet at natural environment, and then deteriorated the natural environment to be tested, such as thesalt spray, dry, wet, room temperature, low temperature environment, it can be tested in any order or individually tested.
Applicable Industry:
This Cylinder Salt Mist Test Corrosion Testing is tested the corrosion resistance capacity of products, which stay in the intense change environment, such as automobile parts, aviation equipment, photographic equipment, building materials, electricity, electrical and electronic systems,
Corresponding standard:
1.GB/T 20854-2007 Dry and wet salt spray test
2.ISO14993-2001 Dry and wet salt spray test
Technical Specification:
1, Temp Range:RT+10℃~50℃
2, Relative Humidity:85%~95%
3, Temp uniformity:≤±2℃
4, Temp fluctuation:≤±0.5℃
5, Gas way to produce: cylinder method
6, Sulfur oxide gas concentration:0.1~1%(Volume percent)
7, 1.5KW
Image:
Chamber material:
1, Chamber shell: 8mm corrosion resistance PVC plate, 85℃high temperature resistance.
2, Sample holder: fiberglass rod, corrosion resistance.
3, Pressure barrel: 2.0mm SUS#304, seamless joint.
4, Heater: titanium alloy electric heater, corrosion resistance.
5, Machine support: SECC iron with paint spray, have wheels for sliding.
6, Chamber cover: with imported 8mm PVC acrylic transparent observation window.
7, Cover open method: SNS pneumatic method for uniform performance.
8, Machine cover and body are sealed with water to avoid gas leakage.
9, Gas pipe uses corrosion resistance silicone tube.
10, Equip with double gas filtration device to ensure the discharge gas is not harmful for environment.
Control system:
1, Temperature and humidity controller: imported Korea intelligent controller
2, Sensor: PT100 test sensor
3, LED digital display
4, Full digital multiple warning protection system, anti-dry and anti-over temperature
5, With SSR output, imported relay contact
6, Multiple time mode, S, M, H can freely switch
7, Multiple control method for Salt and SO2 switch
8, With defog and desulphuration function to ensure salt and SO2 avoid leakage
9, With flow meter to control the SO2 concentration by rate of flow and time
10, With SO2 filter device, sodium hydroxide and active carbon double filter system to avoid SO2 leakage.
Product parameters:
|
Model |
HD-E808-200-1 |
|
Internal dimension (L×W×H) |
2000×1000x800 mm |
|
External dimension (L×W×H) |
3600x1350x1700 mm |
|
Temperature Range |
Room temperature ～50℃ |
|
Humidity range |
＞95%R.H |
|
Temperature Fluctuations |
≤±0.5℃ |
|
Temperature Uniformity |
≤±2℃ |
|
SO2 input method |
Steel cylinder method, automatic |
|
SO2 discharge method |
With SO2 filtration device, Sodium hydroxide and activated carbon for double filtering system |
|
SO2 concentration |
A quantity of 2L SO2 in a test chamber volume of 300L (0.67%) |
|
SO2 concentration control method |
Controlled by flow meter |
|
Test Chamber Temperature |
Salt Spray Method (NSS ACSS) 35±1℃ |
|
Saturated air Barrel Temperature |
Salt Spray Method (NSS ACSS) 47±1℃ |
|
Brine Temperature |
35℃±1℃ |
|
Spray Quantity |
1.0~2.0 ml / 80cm2 / hr |
|
PH |
Salt Spray Method (NSS ACSS 6.5~7.2) |
|
Brine Tank Capacity |
40L |
|
Power |
Three phase, AC380V, 50Hz |
|
Multiple Safety Protection Devices |
Current discharge protection, over pressure protection, over temperature protection, over load fuse protection |
|
Accessories |
Testing Salt/ Measuring tank/Nozzle Equipment x 1 set |
|
Standard |
ASTM B117, DIN 50018… |
Main components:
|
Controller x 1set |
Sensor x 2pcs |
|
Pressure regulation valve x 2pcs |
Spray magnetic valve x 1pc |
|
SO2 feeding magnetic valve x 1pc |
Cyclic motor x 1pc |
|
Desulphuration water pump x 1pc |
Water inlet magnetic valve x 1pc |
|
Water level meter x 4pcs |
Heater x 1pc |
|
Air filter x 1pc |
O shape sample holder x 16pcs |
|
V shape sample holder x 12pcs |
Sodium chloride x 2 bottles |
|
Measuring tank x 1pc |
Hydrometer x 1pc |
|
User manual x 1pc |
Operation video x 1pc |
Contact Person: Mary
Fax: 86-0769-89280809
