Electronic Production Watrer IP Test Equipment With IPX5 Waterproof Speed Adjustable

Electronic Production Watrer IP Test Equipment With IPX5 Waterproof Speed Adjustable

Haida IPX1 - IPX8 Rain Test Chamber.pdf

Description:
Waterproof Test Equipment is designed and manufactured to meet the requirements of GB4208 and IEC60529. It is intended for determining the degree of protection against harmful deposits of dust (IP5X & IP6X). Dust protected enclosures to numeral 5 allow a limited quantity of dust to penetrate under certain conditions. Dust-tight enclosures to numeral 6 do not allow any dust to penetrate.
 

Technical Parameters:

Box Structure:
Tank shell material made of high quality stainless steel hairline, liner material stainless steel light board; 2 large sight glass door for easy observation test cabinets test sample status;
Imported inverter speed control to ensure the test according to the standard;
Bottom of the chamber can be fixed with high quality PU wheels, easy to move users;
It has a 270 degree swing pipe and 360-degree rotating rod Sprinklers
Adjustable speed of the sample stage

IEC / EN60529 Waterproof Rating:
Level 0: completely waterproof unprotected
Level 1: vertical drops of water should not adversely affect
Level 2: When each vertical housing inclined in the range of 15 °, vertical drip should not adversely affect
Level 3: within each vertical range of 60 ° watering, no harmful effects
Level 4: splashing water in all directions toward the housing does not adversely affect
Level 5: water does not adversely affect the housing in all directions
Level 6: all directions strong water does not adversely affect the housing
Level 7: immersion in water predetermined pressure after a predetermined time the shell into the water without harmful levels
Level 8: according to manufacturers and users mutually agreed terms (to be harsh than 7 Level) from continuing housing dive into the water without harmful degree of
Level 9: high-pressure test
 

Application

IEC WATER IP Test Ingress Protection Standards IP Test Equipment is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray. This test is used to meet the requirements of IPX3 and IPX4 in IEC 60529. In the test described in IPX3 and IPX4 with an oscillating tube, the specimen is placed in the center point of the semicircle defined by the oscillating tube. It is then subjected to a spray of water at a defined pressure to test for leakage. The oscillating tube will have spray holes over 120 of the tube for IPX3 and over the full 180 for IPX4. In IPX3 the tube will oscillate to 60 either side of the vertical. For IPX4 the tube travels through an angle of almost 360. The specimen needs to be placed within 200mm of the tube. For this reason different size tubes are needed to test different size specimens.

IPX Material Waterproof View:
 
 

(Water Flow Meter)