Water Spray IP Testing Equipment Tester IEC60529 IPX3 / IPX4 Rain Waterproof

         Water Spray IP tester IEC60529 IPX3 / IPX4 rain Waterproof IP Test Equipment 

 
Haida IPX1 - IPX8 Rain Test Chamber.pdf

Introduction:

Rain Spray Testing Chamber,Water Rain Testing Equipment with IPX34 is used to simulating the lighting, auto parts,household appliances and other products in condition of moisture or rain,to see the influence of water to the products.Through this can test the resistance to the rain penetration and moisture proof ability of products.

Rain spray testing through a rigorous scientific design,making it can realistically simulate dripping rain, splashing water,water spray and other environment.Water spray test chamber uses advanced controlling system and inverter technology,making the rotation angle of the specimen frame,the swing angle of the oscillating bar and the water swing rate can be automaticallyadjusted.

Description:
Rain Testers With Good Quality, A complete set of IP waterproof test equipment is:
IPX1/2 vertical drop test equipment (with rotating machine and tilt sample samples machine);
IPX3/4 automatic arranging the pouring water test equipment (with automatic turntable);
IPX3/4 handheld drench water test equipment (with lift stents);
IPX5/6 hosing test equipment (D 6.3 mm, D 12.5 mm nozzle);
IPX7/8 and the water immersion test equipment (with water temperature control and 10 atmospheric pressure adjustable);
Auxiliary water supply, filter system (with the above products, especially blunt water device).
 
 
Characteristic: 
·Meet the requirement of IEC60529 standard IPX3 water pouring test and IPX4 water splash test.
·The test sample will be put or installed on the center of the half-round sinuous pipe and make the bottom  of  the test samples and the oscillating axis in a horizontal position. During test, the sample would spin      around the center line.
·Swing pipe standard configuration: R400mm and R500mm two types. Swing pipe inner diameter: Φ15mm.
  DillΦ0.4 holes and make the water spray to the center. The water pressure of the device entrance is        equal  to 10m water level, spraying water pressure is 80-100kpa.
·Water spraying pipe swing angle: 120º,180º,360º, Vertical sides: 60º,90º,175º.
 Complete a swing(2*120º) time is 4S.
 Complete a swing(2*360º) time is 12S.
·Can manual default the test parameters, complete testing automatically shut off the water supply and        pendulum pipe Angle automatic zeroing and automatic eliminate seeper, avoid scale blockage needle tip.
·Use Mitsubishi PLC, LCD panel test procedure control box, stainless steel curved pipe, alloy aluminum        frame, stainless steel shell.
·Servo drive mechanism, guarantee the pendulum pipe Angle of precision, the overall pendulum tube        structure for hang a wall.
 
 
STANDARD FEATURES

PLC Controller: 
1. PLC + touch screen interface
2. test parameter setting and monitoring
 
 

Water Spray Test Chamber Image

 Liner

Our Services:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
1. Pre-service
--24 Hours online service for your consult.
--Help choose right model,and a series of service,person,advise.
2. Middle service:
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax.
3. After sale service :
--1 year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts
--Remote control technical consult
--Free installation DVD
--Maintenance plan
4,Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
5,Good Packaging:
Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

Our company Introduction:

HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.

Why choose us?

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

2. Excellent After sale Service:

18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.

3. Commitment:

We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

4. Good Packaging:

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.