|
Product Details:
|
| Usage: | Sand And Dust Testing Chamber | External Size: | 170 * 150 * 190cm (approx.) |
|---|---|---|---|
| Inner Chamber Size: | 120 * 120 * 120cm | Air Pressure: | 86~106kpa |
| Studio Temperature: | RT~60'C, Adjustable | Powder Type: | Talcum Powder |
| Aspirator Flowing Quantity: | 0~6L/min | Pressure Tolerance: | 0~2kpa |
| Testing Time: | 0~999h88m99s, Adjustable | Blower: | Centrifugal Fan |
| Blowing Dust Cycle: | Interval Control, Adjustable | Door Material: | Tempering Glass |
| Control Interface: | LCD Touch Screen | Weight: | 400kg |
| Power Supply: | AC380V, 50/60Hz, Three Phase | Chamber Material: | SUS#304 Stainless Steel |
| High Light: | ip testing equipment,ingress protection testing |
||
Test Sand and Dust Test Chamber IP Test Equipment CE Approved Simulation
Product Description:
The Test Sand and Dust Test Chamber IP Test Equipment CE Approved Simulationis designed for sealing performance test and reliability test, widely used in electrical, electronics, automobile, motorcycle, LED and other products. It is suitable for the work ability test on the shell sealing performance, product in dust free settlement, in the environment without apparent air flow or with a strong blast air and a large amount of sand dust, and similar conditions.
Main Technical Parameters of Test Sand and Dust Test Chamber IP Test Equipment CE Approved Simulation
|
Item |
Specification |
|
Inner chamber size |
120 * 120 * 120cm |
|
External size |
170 * 150 * 190cm (approx.) |
|
Air pressure |
86~106kpa |
|
Studio temperature |
RT~60'C, adjustable |
|
Amount of talcum powder |
2kg per cubic meter of the test chamber volume Can not have been used for more than 20 tests |
|
Powder type |
Talcum powder |
|
Aspirator flowing quantity |
0~6L/min |
|
Pressure tolerance |
0~2kpa |
|
Metal net size |
Wire diameter 50um, width of a gap between wires 75um |
|
Testing time |
0~999h88m99s, adjustable |
|
Blower |
Centrifugal fan |
|
Blowing dust cycle |
Interval control, adjustable |
|
Chamber material |
SUS#304 stainless steel |
|
Door material |
Tempering glass |
|
Control interface |
LCD touch screen |
|
Vacuum system |
Pressure gauge, air filter, Pressure regulating FRL, connecting pipe, Vacuum pump |
|
Weight |
400kg |
|
Power supply |
AC380V, 50/60Hz, three phase |
Chamber Structure:
1, Chamber material: SUS#304 stainless steel;
2, Transparent window is convenient to observe specimen during testing;
3, Blow fan adopts stainless steel shell, high sealing and wing speed, low noise;
4, Inside the shell is the funnel type, vibration cycle can be adjusted, dust free float in the sky falling to blowing the hole together.
Features of Test Sand and Dust Test Chamber IP Test Equipment CE Approved Simulation:
1. Formed using CNC machining box, nice shape, and no reaction by the handle, easy to operate.
2. Imported high grade stainless steel inner tank (SUS304) mirror panels, use of A3 steel box outside the gall spray, increasing the appearance of the texture and cleanliness.
3. Equipment containing dust vertical circulation of air, dust can be reused for testing; device itself has a good sealing performance, test, laboratory test can clearly observe the situation; device equipped with a vacuum system to meet the needs test; equipment dust the bottom of the device can be replaced.
4. Large observation window with bright lights to keep the box, and use of tempered glass embedded heating element, at any time a clear observation box condition.
5. Test with 50mm diameter holes for the external test power line or signal line.
Test Sand and Dust Test Chamber IP Test Equipment CE Approved Simulation view:
The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
FEATURES:
1. Flexible positioning and electric trolley. It is easy to fix and achieve the changeable value of speed.
2. The height of trolley is relatively low so that is easy to fix the specimen; the strong impact resistance board can guarantee the fastness of the structure.
3. The trolley can be adjusted to be horizontal in order to fix the specimen for customer. The angle adjustment is driven by air cylinder which is flexible and convenient.
4. In order to keep the test staff completely safe, the tester is with remote control function.
5. Before testing, the customer only needs to fix the tester on the ground when stalling it, no other complicated operation.
After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!
Contact Person: Kelly
Fax: 86-0769-89280809
