Tel:
China Lab Test Machines manufacturer
Hai Da Labtester

Haida International Equipment CO.,LTD

 

Home ProductsCorrosion Test Chamber

Dual Pressure Protection Corrosion Salt Spray Test Machine JISH8502 Hot And Humid

Dual Pressure Protection Corrosion Salt Spray Test Machine JISH8502 Hot And Humid

  • Dual Pressure Protection Corrosion Salt Spray Test Machine JISH8502 Hot And Humid
  • Dual Pressure Protection Corrosion Salt Spray Test Machine JISH8502 Hot And Humid
  • Dual Pressure Protection Corrosion Salt Spray Test Machine JISH8502 Hot And Humid
  • Dual Pressure Protection Corrosion Salt Spray Test Machine JISH8502 Hot And Humid
Dual Pressure Protection Corrosion Salt Spray Test Machine JISH8502 Hot And Humid
Product Details:
Place of Origin: china
Brand Name: Haida
Certification: ISO,CE,.......
Model Number: HD-E808
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: Negotiation
Packaging Details: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Delivery Time: 15 days after receive the order
Payment Terms: D/P, Western Union, MoneyGram
Supply Ability: 300 sets months
Contact Now
Detailed Product Description
PH: NSS ACSS6.5~7.2 CASS 3.0~3.2 Power: 1A C220V
Certificate: ISO9001:2008 Design Criteria: CNS, JIS, K5400, Z2371, ASTM
Spray Quantity: 1.0~2.0 Ml / 80cm2 / Hr Warranty Period: 12 Months
Brine Temperature: 35°C±1°C Test Chamber Temperature: NSS ACSS 35±1°C CASS:50±1°C
Temperature Precision: ±1°C Color: White
High Light:

salt fog testing

,

salt spray test machine

Dual Pressure Protection Corrosion Testing JISH8502 hot and humid corrosion chamber

 

 

Product Description:

 

dual pressure protection Corrosion Testing JISH8502 hot and humid corrosion chamber is the use for a variety of surface treatments, including paint, electroplating, organic and inorganic coating, anodizing, anti-rust oil and anti-corrosion treatment to test its resistance to corrosion, thus establishing the quality of the product

 

 

Method of operation


1, the salt spray chamber internal parts: tower spray device, funnel, rod, V-type sample holder installed.
2, connected to the gas supply, the power is turned on, turn on the power switch.
3, in the pressure tank and cabinets add water, two low level light exterminate stop adding water, at the water seal groove seal.
4, purified water and sodium chloride salt in a ratio of 1:20 with a good. The solution was poured into the reagent with a good entrance (low saline to exterminate a lamp).
5, we can open all the lamps burn out operation, spray, time switch, switch demisting before opening end of the test.
6, according to the test requirements for equipment and cycles for continuous spraying mode (continuous spray T1, T2 tables are all set to 0, T1 is set to intermittent spray working time, T2 is time to rest).

 

 

 features:

 

1, the entire PVC board system, internal salt spray corrosion testing machine with advanced three-dimensional reinforcement technology, strong structure, solid, never deformation.
2, automatic / manual water system with low water level automatic / manual functions supplement the water level, testing is not interrupted.
3, precision glass nozzle, salt spray corrosion testing machine 4000 hours to ensure that no crystallization of obstruction.
4, control instruments are in the same board, simple, and clear.
5, with dual over-temperature protection, water shortage alert, ensure safe use.
6, the inlet temperature controller, digital display, PID control, high stability platinum temperature probe, error 0.3
7, the laboratory using direct steam heating method, temperature rise, shorten the salt spray corrosion test machine standby time.
8, spray tower with conical diffuser, a guide fog, adjust the volume, and even off the fog and other functions

  

 

Specification:

 

Model HD-E808-90
Internal Size (L×W×H) 900x600x500mm
External Size (L×W×H) 1410x880x1280mm
Equipment Material Both inside & outside shell adopt P.V.C rigid plastic board
Temperature Range Room temperature ~ 55℃
Temperature Fluctuations ≤±0.5℃
Temperature Uniformity ≤±2℃
Temperature Precision ±1℃
Spraying method Continuous and Periodic spray type
Test Chamber Temperature Salt Spray Method (NSS ACSS)35±1℃
Corrosion-resistant Testing Method (CASS) 50±1℃
Saturated air Barrel Temperature Salt Spray Method (NSS ACSS)47±1℃
Corrosion-resistant Testing Method (CASS) 63±1℃
Brine Temperature 35℃±1℃
Spray Quantity 1.0~2.0 ml / 80cm2 / hr
PH value Salt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2
Lab Volume 270L
Brine Tank Capacity 25L
Multiple Safety Protection Devices Current discharge protection, over pressure protection, over temperature protection, over load fuse protection
Accessories Testing Salt/ Measuring tank/Nozzle Equipment x 1 set
Air source 1HP Air pump (provided by buyer)
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operation interface:

 

Dual Pressure Protection Corrosion Salt Spray Test Machine JISH8502 Hot And Humid 0

 

 

Control System


P.I.D. precision temperature controller, error is ± 0.1 ℃, Fuji, RKC, Honeywell table (optional).
Continuous or periodic spraying optional.
All are equipped with circuit breakers, all heaters are electronic and mechanical overheating protection device with.
Multiple system protection, safety and reliability. GB / T2423.17-2008 Electrical and Electronic Products Environmental Testing Part 2: Test methods - Test Ka: Salt

 

 

Standards:


CNS, 3627,3885,4159,7669,7670,8886,JIS,D020,H8302,H8610,K5400, Z2371,ISO,3768,3769,3770,ASTM,B117, B268

 

 

Structural features:


1, inside and outside the gallbladder were integrally molded glass fiber reinforced epoxy, light weight, corrosion resistance, high strength, no leakage, the surface, smooth and easy to clean and so on.
2, the water seal in the form of salt spray will not spill, jacket heating duct, so the studio warming up fast, uniform temperature distribution.
3, salt box cover is designed to 110 ~ 112 ℃ apex, not to direct the cold box of condensed water dripping on the test.
4, spray-way tower spray, spray tower placed on the underside of the middle of the studio. Nozzle material is quartz glass baked sprayed mist of fine materials, salt spray natural subsidence was distributed evenly.
5, the control system equipment is placed in the upper right box, user-friendly operation, set the power switch, ranked fog switch, spray switch on the front panel, two self-tuning PID digital instrumentation and equipment operation timer and a gap spray timer circuit board in the cabinet also ad hoc over-temperature protection.

Contact Details
Hai Da Labtester

Contact Person: Mr. Liang

Tel: +8613602361535

Send your inquiry directly to us
Other Products
Hai Da Labtester
6th Floor, Rongda Building, Yuanwubian Road, Nancheng District, Dongguan, Guangdong, China (Mainland)
Tel:86-0769-89201068
Mobile Site Privacy Policy China Good Quality Lab Test Machines Supplier. © 2015 - 2021 labtestmachines.com. All Rights Reserved.