Tel:
China Lab Test Machines manufacturer
Hai Da Labtester

Haida International Equipment CO.,LTD

 

Home ProductsCorrosion Test Chamber

CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen

CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen

  • CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen
  • CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen
  • CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen
  • CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen
CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen
Product Details:
Place of Origin: china
Brand Name: Haida
Certification: ISO,CE,.......
Model Number: HD-E808
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: Negotiation
Packaging Details: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Delivery Time: 15 days after receive the order
Payment Terms: D/P, Western Union, MoneyGram
Supply Ability: 300 sets months
Contact Now
Detailed Product Description
PH: NSS ACSS6.5~7.2 CASS 3.0~3.2 Power: 1A C220V
Certificate: ISO9001:2008 Design Criteria: CNS, JIS, K5400, Z2371, ASTM
Spray Quantity: 1.0~2.0 Ml / 80cm2 / Hr Warranty Period: 12 Months
Brine Temperature: 35°C±1°C Test Chamber Temperature: NSS ACSS 35±1°C CASS:50±1°C
Temperature Precision: ±1°C Color: White
High Light:

corrosion testing equipment

,

salt fog testing

CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen

 

 

Product image & Description:

Salt Spray Tester involves a salt spray fog with the addition of Sulfur Dioxide (SO2) gas directly into the salt spray testing chamber or cabinet. The salt spray solution is defined either by mutual agreement or by the specifications covering the material or product to be tested.

 

 

principle

 

Salt spray chamber test can be done, there are four: neutral salt spray test (NSS), copper accelerated acetic acid salt spray test (CASS), alternating salt spray test, the acetic acid salt spray test (ASS test). Of course, different test is required not only test solution is not the same, even the design and structure of the cabinet may vary.
1. A neutral salt spray test (NSS) test chamber temperature requirements at (35 ± 2) ℃, humidity greater than 95%, reducing the amount of fog is 1 ~ 2mL / 80cm * h nozzle pressure of 78.5 ~ 137.3kPa (0.8 ~ 1.4 kgf / cm2). In the salt spray test chamber, containing (5 Guests 0.5)% sodium chloride, pH value of 6.5 to 7.2 by spraying salt water spray apparatus, so that the salt spray test the test pieces to the settlement, after a certain time observe the surface corrosion.
2. copper accelerated acetic acid salt spray test (CASS) is added 5% sodium chloride brine water 2 copper chloride salt spray test on the basis of the general, a concentration of 0.26g / L, and then adjusted with acetic acid PH, salt spray collected liquid PH value of 3.1-3.3. (Reference test GB / T 10125 artificial atmosphere corrosion test)
3. alternating salt spray test is a comprehensive salt spray test (using alternating salt spray chamber to achieve.
4. acetic acid salt spray test (ASS test) is developed on the basis of neutral salt spray test. It is added to some of glacial acetic acid in 5% sodium chloride solution.
 
 

Product parameters:

 

Model

HD-E808-200-1

Internal dimension (L×W×H)

2000×1000x800 mm

External dimension (L×W×H)

3600x1350x1700 mm

Temperature Range

Room temperature ~50℃

Humidity range

>95%R.H

Temperature Fluctuations

≤±0.5℃

Temperature Uniformity

≤±2℃

SO2 input method

Steel cylinder method, automatic

SO2 discharge method

With SO2 filtration device, Sodium hydroxide and activated

carbon for double filtering system

SO2 concentration

A quantity of 2L SO2 in a test chamber volume of 300L (0.67%)

SO2 concentration control method

Controlled by flow meter

Test Chamber Temperature

Salt Spray Method (NSS ACSS) 35±1℃
Corrosion-resistant Testing Method (CASS) 50±1℃

Saturated air Barrel Temperature

Salt Spray Method (NSS ACSS) 47±1℃
Corrosion-resistant Testing Method (CASS) 63±1℃

Brine Temperature

35℃±1℃

Spray Quantity

1.0~2.0 ml / 80cm2 / hr

PH

Salt Spray Method (NSS ACSS 6.5~7.2)
Corrosion-resistant Testing Method (CASS) 3.0~3.2

Brine Tank Capacity

40L

Power

Three phase, AC380V, 50Hz

Multiple Safety Protection Devices

Current discharge protection, over pressure protection, over

temperature protection, over load fuse protection

Accessories

Testing Salt/ Measuring tank/Nozzle Equipment x 1 set

Standard

ASTM B117, DIN 50018…

 

 

Method of operation:


1, the salt spray chamber internal parts: tower spray device, funnel, rod, V-type sample holder installed.
2, connected to the gas supply, the power is turned on, turn on the power switch.
3, in the pressure tank and cabinets add water, two low level light exterminate stop adding water, at the water seal groove seal.
4, purified water and sodium chloride salt in a ratio of 1:20 with a good. The solution was poured into the reagent with a good entrance (low saline to exterminate a lamp).
5, we can open all the lamps burn out operation, spray, time switch, switch demisting before opening end of the test.
6, according to the test requirements for equipment and cycles for continuous spraying mode (continuous spray T1, T2 tables are all set to 0, T1 is set to intermittent spray working time, T2 is time to rest).

 


Precautions:


1, regular cleaning and maintenance of salt spray chamber pressure tank, brine tank nozzle.
2. Do not pressure sodium chloride solution from the barrel manually add water poured out, the first transfer solution within the cylinder and then further cleaned with distilled water.
3, Do not test the exhaust pipe behind the blockage, in order to avoid too much pressure to make the cabinets housing deformation.
4, do not put inflammable and explosive materials inside.
5, salt spray chamber behind the pressure gauge is 2 kg, 1 kg in front, factory in Wuhan still test test Equipment Co., Ltd. has designed, do not tamper with.
6, spray amount is less than set the spray tower to increase, reduce excessive spray spray tower (spray amount collected standard is 1 ~ 2ml / h, takes in 16-hour average)

 

 

Control system:

 

1, Temperature and humidity controller: imported Korea intelligent controller

2, Sensor: PT100 test sensor

3, LED digital display

4, Full digital multiple warning protection system, anti-dry and anti-over temperature

5, With SSR output, imported relay contact

6, Multiple time mode, S, M, H can freely switch

7, Multiple control method for Salt and SO2 switch

8, With defog and desulphuration function to ensure salt and SO2 avoid leakage

9, With flow meter to control the SO2 concentration by rate of flow and time

 

 

Main components:

 

Controller x 1set

Sensor x 2pcs

Pressure regulation valve x 2pcs

Spray magnetic valve x 1pc

SO2 feeding magnetic valve x 1pc

Cyclic motor x 1pc

Desulphuration water pump x 1pc

Water inlet magnetic valve x 1pc

Water level meter x 4pcs

Heater x 1pc

Air filter x 1pc

O shape sample holder x 16pcs

V shape sample holder x 12pcs

Sodium chloride x 2 bottles

Measuring tank x 1pc

Hydrometer x 1pc

User manual x 1pc

Operation video x 1pc

 

 

Image:

 

CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen 0

CE Approval Salt Spray Corrosion Test Chamber with Intelligent Touch Screen 1

 

 

Main components:

 

Controller x 1set

Sensor x 2pcs

Pressure regulation valve x 2pcs

Spray magnetic valve x 1pc

SO2 feeding magnetic valve x 1pc

Cyclic motor x 1pc

Desulphuration water pump x 1pc

Water inlet magnetic valve x 1pc

Water level meter x 4pcs

Heater x 1pc

Air filter x 1pc

O shape sample holder x 16pcs

V shape sample holder x 12pcs

Sodium chloride x 2 bottles

Measuring tank x 1pc

Hydrometer x 1pc

User manual x 1pc

Operation video x 1pc

 

Contact Details
Hai Da Labtester

Contact Person: Mr. Liang

Tel: +8613602361535

Send your inquiry directly to us
Other Products
Hai Da Labtester
6th Floor, Rongda Building, Yuanwubian Road, Nancheng District, Dongguan, Guangdong, China (Mainland)
Tel:86-0769-89201068
Mobile Site Privacy Policy China Good Quality Lab Test Machines Supplier. © 2015 - 2021 labtestmachines.com. All Rights Reserved.