|
Product Details:
|
| Feature: | Easy To Operate | Weight: | 175Kg |
|---|---|---|---|
| Detecting Width: | 600mm | Alarm Method: | Buzzer |
| Belt Speed: | 40m/min | Rated Output: | 100W |
| Conveyor Length: | 1350mm | Power: | AC 220V,50HZ,120W |
| Highlight: | textile testing machine,fabric testing equipment |
||
Conveying Type Industrial Metal Detectors Ndc A Conveyor For Garment / Textile
Conveying Type Industrial Metal Detectors Ndc A Conveyor For Garment / Textile widely used in the detection cartoon toys (plush toys, soft toys), clothing, knitwear, bedding, food (aluminum packaging), leather, textile and other industries, for the detection of loss of raw materials or products of ferromagnetic materials (such as iron needle iron nails) pieces
FEATURES:
1. Cycled,9 pairs of scnsor,excellentanti-disturbance performance.
2. Based on LED bar displayed control panel.
3. Hi accuracy detection locating technology,LED indication.
4. Lovel setup indication and real-time scnsitivity display.
5. Optional conveying mode after alarm.
6. Optional automatical restart.
7. Reliability mechanical frame design,Hi stable during detection.
8. Designed for universal AC power supply,switch power supply
working principle:
When a ferromagnetic object enters the detection channel, generate the probe up and down through a strong magnetic field sensor signal and sends the signal to the signal receiving and processing blocks, and then scanned with a photoelectric sensor, high voltage blocks, sensitivity control manifold, manifold and signal reception signal output manifold and actuators to complete the testing.
Spectifications:
|
Model |
W801 |
|||||
|
Window Height |
100mm |
120mm |
150mm |
200mm |
250mm |
|
|
Window Width |
440mm |
440mm |
440mm |
440mm |
440mm |
|
|
Sensitivity |
Fe Diameter>= |
0.6mm |
0.8mm |
1.0mm |
1.2mm |
1.5mm |
|
SUS Diameter>= |
1.5mm |
1.8mm |
2.0mm |
2.5mm |
3.0mm |
|
|
Power |
220V,50HZ,120W |
|||||
Technology Parameters:
|
Model |
Industrial Broken Needle Detector Machine |
|
Detecting Sensitivity |
diameter 0.8 mm to 2.5mm iron ball |
|
Sensitivity adjust |
1-10 level |
|
Detecting Width |
60cm |
|
Detecting Height |
10-30cm |
|
Alarm method |
Buzzer,Lamp |
|
Conveying speed |
24m/min(50Hz),32m/min(60Hz) |
|
Power |
AC220V |
|
Rated Output |
60W |
|
Body size |
185cm(L)*105cm(W)*95cm(H) |
Composition structure:
1, the detection sensor (probe): Detection of induction by the upper and the lower detector sensors (position below the belt) composition
2, the circuit control system: signal amplifying circuit and signal circuit alarm system, power supply protection circuit has three major components
3, Motor: single-phase capacitor gear reduction motor rotation
4. The conveyor belt: the role of the conveyor is to be detected by detecting articles carrying the sensor for detecting the ladder tool, it uses a special anti-static nylon mesh woven into the warp and weft, adhesive special rubber surface, absolute guarantee no alarm conveyor belt without a little iron and metal components, in order to ensure the sensor when tested
5, the rack: rack made of steel plates, reaching Needle whole bridge effect is the primary framework Needle multifunctional state structure, making it more stable performance, the appearance of electrostatic spraying, both beautiful and can be extended life.
6, the wing skin: both play a decorative appearance, the early use of aluminum production, in terms of relative iron play a role in shielding the signal, because the aluminum shell handmade, suitable for small production of non-standard or custom manufacturers machines, strength of the manufacturers have to use their own mold engineering hard plastic shell.
7, drive shaft: stainless steel tube combined with four plane propeller shaft bearings for rolling structure, making it more transmission concentricity ensure smooth transmission lubrication, low noise, low heat, long life.
8. Optical Infrared emitter: when will launch a bunch of invisible infrared working condition, when it is played by the analyte infrared intercept and transmit signals to the recorder, eventually qualified items were counted.
9, the control panel: used to control the machine operation and sensitivity testing, display counting functions
Contact Person: Mary
Fax: 86-0769-89280809
