|
Product Details:
|
| Product Nmae: | Temperature Cycling Humidity Test Chambers | Temperature Range: | -70~+150℃ |
|---|---|---|---|
| Cooling Speed: | 1℃/min In Average (without Loading) | Heating Speed: | 3℃/min In Average (without Loading) |
| Internal Chamber Material: | SUS#304 Stainless Steel, Mirror Finished | ||
| High Light: | Temperature And Humidity Controlled Cabinets,Temperature Humidity Test Chamber |
||
Temperature Cycling Humidity Test Chambers Price With Programmable
HD-E702-100-7 Climate Chamber.pdf
Introduction:
Temperature Cycling Humidity Test Chambers from Haida provide the temperature cycling and humidity performance you need to validate quality and reliability for increasingly sophisticated electronics and other products.
Standard Features
| Model | HD-E702-100-7 |
| Internal dimension (W*D*H) | 400*500*500mm |
| External dimension (W*D*H) | 600*1280*1380mm |
| Temperature range | -70~+150℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature uniformity | 2℃ |
| Humidity range | 20~98%RH (Refer Image below) |
| Humidity fluctuation | ±2.5%RH |
| Humidity uniformity | 3%RH |
| Cooling speed | 1℃/min in average (without loading) |
| Heating speed | 3℃/min in average (without loading) |
| Internal chamber material | SUS#304 stainless steel, mirror finished |
| External chamber material | Stainless steel |
| Cooling method | Air cooling |
| Controller |
LCD touch screen, programmable control temperature and humidity Can set different parameter for cyclic test |
| Insulation material | 50mm high density rigid Polyurethane foam |
| Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater |
| Compressor | France Tecumseh compressor x 2sets |
| Lighting | Heat resistance |
| Temperature sensor | PT-100 dry and wet bulb sensor |
| Observation window | Tempered glass |
| Testing hole | Diameter 50mm, for cable routing |
| Sample tray | SUS#304 stainless steel, 2pcs |
| Safety protection device |
Protection for leakage Over-temperature Compressor overvoltage and overload Heater short circuit Water shortage |
Applications
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect
Performance:
Temperature Cycling Humidity Test Chambers has twenty different models to allow you to choose the size and performance best suited for your test applications. Temperature cycling rates from 5 to 20°C/min. are possible.
Two different ultimate low temperatures are avail- able: -40°C or -70°C.
Temperature Cycling Test Chamber also control humidity, for expanded testing options beyond temperature cycling.
Temperature Cycling Test Chambers are capable of meeting the performance requirements of ASTM, IEC, GB, and other international environmental test performance standards.
Programmable Controller
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output
Humidity Range
PLC Operation
Internal Chamber
Contact Person: Kelly
