Tel:
China Lab Test Machines manufacturer
Hai Da Labtester

Haida International Equipment CO.,LTD

 

Home ProductsEnvironmental Test Chamber

Three Zone Thermal Shock Test Chamber / High Low Temperature Testing

Three Zone Thermal Shock Test Chamber / High Low Temperature Testing

  • Three Zone Thermal Shock Test Chamber / High Low Temperature Testing
  • Three Zone Thermal Shock Test Chamber / High Low Temperature Testing
Three Zone Thermal Shock Test Chamber / High Low Temperature Testing
Product Details:
Place of Origin: China
Brand Name: Haida
Certification: CE,,ISO
Model Number: HD-E703
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiation
Packaging Details: each set protected with resin fiber and PP film, then put into Strong wooden case with operation man
Delivery Time: 20 days after order confirmed
Payment Terms: L/C, T/T, D/A, D/P, Western Union, MoneyGram
Supply Ability: 300 Sets per Month
Contact Now
Detailed Product Description
Usage: High And Low Temperature Thermal Shock Test Chamber High Temp. Exposure Range*1: +60~ To +200°C
Low Temp. Exposure Range*1: -65to 0 °C Temp. Fluctuation *2: ±1.8°C
Temp. Heat Up Time*3: Ambient Temp. To +200°C Within 30min External Material: Cold-rolled Rust-proofed Steel Plate
Cooler: Stainless Steel Welded Plate Heat Exchanger Allowable Ambient Conditions: +5~30°C
Power Supply: AC380V, 50/60Hz, Three Phase , 30A Cooling Water Supply Rate*6: 8m³ /h
Use: Thermal Shock Machine
High Light:

environmental testing equipment

,

environmental test chamber

Three Zone Thermal Shock Test Chamber / High Low Temperature Testing

 

1. Description:

Three-Zone High-Low Temperature Thermal Shock Environmental Test Chamber Degree in an instant by a high temperature and extremely low temperature environment can tolerate continuous, that is, in the shortest time test chemical changes or physical damage due to its thermal expansion and contraction caused. Suitable objects include metal, plastic, rubber, electronics ... and other materials can be used as a basis for improvement of their products or reference

 

 

2.Thermal Shock Chambers of the structure:


. the chamber configuration mode: Chamber compositions using integrated configuration mode, both located in the upper chamber by a high-temperature chamber, located in the lower part of the low temperature test box, located at the rear of the cabinet and the refrigeration unit on the left rear panel electrical control cabinet composed of (system). This way the box covers an area of ​​small, compact structure, beautiful appearance, chiller cabinets placed in a separate unit, the refrigeration unit to reduce vibration during operation, the impact of noise on the chamber, while facilitating devices and maintenance of the unit, electrical control panel on the left panel of the chamber in order to run the operation.


. the outer wall of the housing materials: high-quality carbon steel plate, look for color electrostatic spray disposal.


. high and low temperature impact test chamber insulation materials: high-quality ultra-fine glass fiber cotton.


. the inner wall of the housing material: Imported SUS304 stainless steel, corrosion-resistant, easy to clean.


. laboratory lighting installations: moisture-proof lights.


. view window: On the box (hot box) opened the door to a 350 × 250mm electric moisture barrier coating temperature View window.


. high and low temperature shock chamber sample holder: move up and down the guide rails stainless steel sample holder. Is powered by twin forces provide a smooth cylinder Average positioning sample holder mounting indirect Germany FESTO company producing electric sensor.

 

. cable threading hole: in the upper part of the sample holder with the top of the housing is provided with a high-temperature test slide cable conduit.

 

. sample holder bearing: ≥30Kg.

 

 

3. Specifications of Three-Zone High-Low Temperature Thermal Shock Test Chamber:

System

Two-zone test by means of damper switching

Three-zone chamber

Model

HD-E703-50A/HD-E703-50W

HD-E703-100A/HD-E703-100W

Customized

Performance

Test area

High temp. exposure range*1

+60~ to +200°C

Low temp. exposure range*1

-65to 0 °C

Temp. fluctuation *2

±1.8°C

Hot chamber

Pre-heat upper limit

+200°C

Temp. heat up time*3

Ambient temp. to +200°C within 30min

Cold chamber

Pre-cool lower limit

-65°C

Temp. pull down time*3

Ambient temp. to -65°C within 70min

Temp. recovery (2-zone)

Recovery conditions

Two-zone: High temp. exposure +125°C 30 min, Low temp. exposure -40°C 30 min; Specimen 6.5 kg (specimen basket 1.5kg) 

Temp. recovery time

Within 10 min.

Construction

External material

Cold-rolled rust-proofed steel plate

Test area material

SUS304 stainless steel

Door*4

Manually operated door with unlock button

Heater

Strip wire heater

Refrigeration unit

System*5

Mechanical cascade refrigeration system

Compressor

Hermetically sealed scroll compressor

Expansion mechanism

Electronic expansion valve

Refrigerant

High temp side:R404A, Low temp side R23

Cooler

Stainless steel welded plate heat exchanger

Air circulator

Sirocco fan

Damper driving unit

Air cylinder

Fittings

Cable port with diameter 100mm on the left side (right side and tailor made diameter size are available as options), specimen power supply control terminal

Inside dimensions (W x H x D)

350 x 400 x 350

500 x 450 x 450

Customized

Test area capacity

50L

100L

Customized

Test area load

5 kg

10 kg

Customized

Outside dimensions (W x H x D)

1230 x 1830 x 1270

1380 x 1980 x 1370

Customized

Weight

800kg

1100kg

N/A

 

Utility requirements

 

Allowable ambient conditions

+5~30°C

Power supply

AC380V, 50/60Hz, three phase , 30A

Cooling water supply pressure*6

02~0.4Mpa

Cooling water supply rate*6

8m³ /h

Operating cooling water temp. range

+18 to 23 °C

Noise Level

70 dB or lower

 
 

4.Shock chamber works as follows:

 

. low temperature storage tanks: tank temperature is determined by the state of the duct heater, evaporator and the working status of the fan. After the expansion valve throttling the refrigerant flowing into the evaporator in the working chamber, the working chamber of heat absorption and gasification, to reduce the temperature of working chamber; gasified refrigerant is sucked and compressed to a high temperature, high pressure gas into the condenser compressor It is condensed into liquid, and then the screening program, and finally through the expansion valve throttling, re-entered the studio evaporator endothermic gasification and then compressed by the compressor suction

 

. high-temperature storage tanks: a central controller temperature sensing signal from the detection instant, and the set temperature signal is compared, the comparison signal obtained by the instrument PID logic circuit output signal to control the solid state relay is turned off or adjusting the heating time ratio output power level, so as to achieve the purpose of automatic temperature control.

 

. temperature shock test chamber: the meter automatically controlled high temperature valves, low or high temperatures between the storage chamber switched respectively to form a closed air circulation system and low temperature box or boxes, quickly reached the target temperature test

 
 
Buy thermal shock chambers should pay attention to five areas:
the impact of temperature, load test, reset time, defrost time, sensor placement.
 
 
The air Control:

Forced circulation ventilation, balanced temperature method (BTC). This method not only refers to the case of the cooling system for continuous operation, the control system according to the temperature set point of the heater to control the output of the results by automatically calculating PID output, and ultimately achieve a dynamic equilibrium.
 
 

5.Notes

 

. If the high-temp exposure range lower limit + 60°C is required or the low temp exposure range lower limit -60°C, please select the “ambient-temperature exposure” option

 

. If the temp fluctuation need to below ±1.8°C please select the “Low temp fluctuation package”

 

. Temperature heat-up/pull down time are applicable only during independent chamber operation

 

. If the automatically operated sliding door required, please select the “Automatically door package”

 

. Air-cooled condenser / Water-cooled condenser both available

 

. Apply on water-cooled condenser only

 

 

6. Safety Devices of Three-Zone High-Low Temperature Thermal Shock Test Chamber:

 

.  Hot chamber overheat protection switch

.  Cold chamber overheat protection switch

.  Air circulator overload alarm

.  Refrigerator high/low pressure protector

.  Compressor temperature switch

.  Air pressure switch

.  Fuse

.  Water suspension relay ( water-cooled specification only)

.  Compressor circuit breaker

.  Heater circuit breaker

.  Test area overheat/overcool protector

.  Air purge valve

 

7.Control 

 

thermal shock machine

(Color LCD interactive touch-screen system)

 

Operation and settings simplified by the use of a touch-screen LCD display (instructions displayed on-screen). At-aglance confirmation of test patterns, test area temperatures, temperature cycles, and trend graph displays.

 

Setting

Interactive key input by touch panel

Display

LCD (5.7 inches)

Temperature control function

Test area: exposure temp.

Hot chamber: pre-heating temp.

Cold chamber: pre-cooling temp.

PID control

Preset temperature range

High temperature: 60 to200’C

Low temperature: -78 to 0’C

Setting resolution

1’C

Input

Thermocouple type T (Copper/Copper-Nickel)

Setting and indication ranges

Preset time: 0 min. to 99 hours and 59 min.

Preset cycle: 1 to 9,999 cycles

Accessory function

Timer preset

Overheat/ overcool protection

Power failure/ recovery selection

Temperature recovery time setting

Program memory

Automatic power shut-off

Programmed time display

Test completion mode selection

Trend graph

Alarm history display

Sensor calibration

RS-232/ USB communication

 

8.Maintenance

 

Radiator Thermal Shock Test the refrigeration unit (condenser) should be regularly maintained and kept clean. Sticky dust the condenser and the compressor will generate false alarms tripped high pressure switch, the condenser should be regularly monthly maintenance, use a vacuum cleaner to use after a hard brush dust suction power or attachment of the condenser cooling mesh brushes or high pressure gas nozzle blown clean of dust.

 

 

Packaging & Shipping

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

 

Our Services

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

1. Pre-service

24 Hours online service for your consult.

Help choose right model,and a series of service,person,advise.

2. Middle service

--Give you best offer

--Provide discount for many sets order

--Do customer's request:

--Choose payment term you convienent.

--Promptly production and delivery,inform you in time.

--Can provide invoice value as you like to decrease your tax.

3. After sale service

--1 year warranty service and all life maintenance.

--Technical Egineer are avalible for oversea trainning.

--Free change for some parts

--Remote control technical consult

--Free installation DVD

--Maintenance plan

4,Commitment:

We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

5,Good Packaging:

Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

FAQ

Why choose us?

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.

3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

4.Good Packaging:

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

How to Contact Us?

Please Send your inquiry Details in the below for our quotation,Click "Send" Now!

 

Contact Details
Hai Da Labtester

Contact Person: Mr. Liang

Tel: +8613602361535

Send your inquiry directly to us
Hai Da Labtester
6th Floor, Rongda Building, Yuanwubian Road, Nancheng District, Dongguan, Guangdong, China (Mainland)
Tel:86-0769-89201068
Mobile Site Privacy Policy China Good Quality Lab Test Machines Supplier. © 2015 - 2021 labtestmachines.com. All Rights Reserved.