|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||each set protected with resin fiber and PP film, then put into Strong wooden case with operation man|
|Delivery Time:||20 days after order confirmed|
|Payment Terms:||L/C, T/T, D/A, D/P, Western Union, MoneyGram|
|Supply Ability:||300 Sets per Month|
|Usage:||Electronic Products Waterproof IP Test IPX1~IPX8 Rain Spray IP Test Equipment||Rotating Speed:||Adjustable|
|Arm Radius:||300mm, 400mm, 600mm, 800mm, 1000mm, 1200mm Or 1500mm||Rotating Angle:||+/-270, Adjustable|
|Rotating Table:||Speed Is Adjustable||Flow Rate:||0.07L/min (IPX3,4), 0.6+/-0.5L/min (IPX4K)|
|Nozzle Distance:||50mm||Nozzle Diameter:||0.4mm|
|Power:||1 Phase, 220V, 5KW||Weight:||Approx.350kg|
|Specimen Rotative Speed:||1-3r/min (Adjustable)|
ip testing equipment,
ingress protection test equipment
Electronic products waterproof IP test IPX1~IPX8 rain spray IP test equipment
Water Spray Test Chamber.pdf
Electronic products waterproof IP test IPX1~IPX8 rain spray IP test equipment is normally used for testing anti-rain or water-proof performance of material or products, such as steam locomotive lamps, wiper performance, waterproof bands, motorcycle instruments, defense industry, navigation systems, missiles, radar cone top, aerospace industry, etc. its design considered auto maker's and electronic industry testing.It adopt large viewing glass can let the operator se the specimen clearly. Digital setting, operating easy, maintenance quickly.
1. Meet the requirement of IEC60529 standard IPX3 water pouring test and IPX4 water splash test
2. The test sample will be put or installed on the center of the half-round sinuous pipe and make the bottom of the test samples and the oscillating axis in a horizontal position. During test, the sample would spin around the center line.
3. Can manual default the test parameters, complete testing automatically shut off the water supply and pendulum pipe angle automatic zeroing and automatic eliminate seeper, avoid scale blockage needle tip
4. Use Mitsubishi PLC, LCD panel test procedure control box, stainless steel curved pipe, alloy aluminum frame, stainless steel shell
5. Servo drive mechanism, guarantee the pendulum pipe angle of precision, the overall pendulum tube structure for hang a wall.
|Spray Type||Total Water Flow(L/min)||R1||1.8||IP×1||With in 1~1.5mm/min(In drip box)|
|R2||3.2||IP×2||With in 3~3.5mm/min(In drip box)|
|Pressure of spray nozzle(kgf/cm*2)||R1||0.1||1.Flow rate of the water=0.07L/min|
2.1P×3,Radius:400mm,16Number or open
holes=16,total water flow:1:1L/min.
3.1P×4,Radius:400mm,25Number or open
holes=25,total water flow:1:8L/min.
(For 1P×3,1P×4 only)
|(RPM)Test Specimen Frame||17RMP||1RPM|
|Spray Nozzle Rotation Speed||23RPM||Promote the pipe on both sides of the vertical line of 30 ° each time back and forth about four seconds to promote|
Swing 60 ° from vertical for 4 seconds at one time
Promote the pipe on both sides of the vertical line of 180 ° for about 12 seconds to promote one round
Swing 180 ° from vertical for 12 seconds at one time
|Other Components||Chamber lamp.Wiper|
casters with Adjusters
|Chamber lamp.Wiper,casters with Adjusters|
|Power Source(K.W.)||AC 1Ψ 220V 60/50Hz 4KW|
1. PLC + touch screen interface
2. test parameter setting and monitoring
1. Flexible positioning and electric trolley. It is easy to fix and achieve the changeable value of speed.
2. The height of trolley is relatively low so that is easy to fix the specimen; the strong impact resistance board can guarantee the fastness of the structure.
3. The trolley can be adjusted to be horizontal in order to fix the specimen for customer. The angle adjustment is driven by air cylinder which is flexible and convenient.
4. In order to keep the test staff completely safe, the tester is with remote control function.
5. Before testing, the customer only needs to fix the tester on the ground when stalling it, no other complicated operation.
Contact Person: Mr. Liang