|
Product Details:
|
| Working Mode: | CRE | Control Model: | LCD Display(can Be Connect Computer) |
|---|---|---|---|
| Gripper: | Single Gripper | Pressure Range: | 0 ~ 4000Pa |
| Slip Width: | ≤0.3nm | Burn Flame Altitude: | 38mm |
| Counter: | 0~999 999 Can Be Set | Test Type: | UV Lamp |
| Connect: | USB2.0 | Measuring Error: | ≤±2% |
| Display Type: | Liquid Crystal | Load: | 2.5±0.1N; 5±0.1N; 10.0±0.2N |
| Weight: | Varies By Model | Net Weight: | 10 Kg |
| Quality: | High | Test Standard: | UL817 |
| Speed Range: | 0.01-300mm/min | Heating Method: | Electric Heating |
| Highlight: | textile testing equipment for yarn strength,single yarn strength tester,natural fiber textile testing equipment |
||
![]()
This test is used to assess the dynamic impact resistance of basketballs, soccer balls, volleyballs, and handballs. Two high-speed rotating drums, positioned opposite each other, propel the specimen at high speed through friction and compression. The specimen impacts a rebound plate, which then bounces it back into a receiving funnel. Under gravity, the force transfers the specimen to the launching drums, where it is launched again. After a set number of tests, the pressure changes within the specimen are checked, along with any signs of cracking, implosion, peeling, delamination, thread breakage, or deformation.
| Item | Description |
| Drum Dimensions | Center 600mm, Height 250mm |
| Angle between Rebound Plate and Ground | 60°+ 2° |
| Distance between Drum and Rebound Plate | 1950°+ 50mm |
| Impact Distance | 2500°+ 50mm |
| Drum Speed | (340~450) ± rpm |
| Spacing Scale | Minimum graduation 1mm |
| Upper and Lower Drum Spacing | 130~180mm (Adjustable) |
| Display and Control System | PLC + HMI (7-inch Touchscreen) |
| Initial Velocity at Launch Point | ≥50km/h |
| Dimensions | 330*90*2500 cm(W*D*H) |
| Control Box | 37*58*112mm |
| Weight | 1400kg |
| Power Supply | 3phase AC380V,50/60Hz |
Contact Person: Mary
Tel: 13677381316
Fax: 86-0769-89280809