|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||each set protected with resin fiber and PP film, then put into Strong wooden case with operation man|
|Delivery Time:||20 days after order confirmed|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||300 Sets per Month|
|Lower And Raising Speed Of The Test Specimen:||25 Times/minute||Test Cyclic:||15000 Cyclic (adjustable)|
|Fixture:||Two Fixtures Suitable Different Cutlery||Power:||1 Phase, AC 220V, 50～60Hz|
universal testing machines,
universal material tester
Unique Using Brine To Perform Corrosion Handle Fatigue Testing Equipment
The machine is used to test handle fatigue of cutlery, it load the handle, raising and lower under 15000 cyclic, then check the handle deformation or loose.
1.Lower and raising speed of the test specimen : 25 times/minute.
2.The level surface was covered by a 5 mm thickness rubber having a hardness 50 ± 10 shore.
3.1 mm clearance between the cam and the follower when the cam at lowest position.
4.Test cyclic: 15000 cyclic (adjustable)
5.Fixture: two fixtures suitable different cutlery
6.Out dimension: (L×W×H) 625mm×450mm×750mm
7.Power: 1 phase, AC 220V, 50～60Hz.
4.Kitchenware tester Specifications
1)Platform in contact with the ovenware covered by a rubber plate thickness = 5 mm, hardness is (50 +/- 10 Shore)
2) Test speed is adjustable from 15 to 30 cycles per minute.
3) Two set of fixture provided for the lever handle type ovenware and ear type handle ovenware.
4) Pre set counter for the test cycle setting.
Contact Person: Mr. Liang