|Superfine Glass Fabric
|Xenon Testing Machine
ozone test chamber,
accelerated aging calculator
Economic Xenon Accelerated Aging Testing Machine Environmental Test Machine
Xenon aging chamber is to test the product undergone illumination / rain condensation / temperature / humidity / any other climatic changes.
1. full spectrum lamps.
2. multiple choice of filtration system.
3. Xenon lamp aging tank of water spray feature.
4. relative humidity control.
5. test chamber air temperature control system.
5. the irregular shape of the sample holder.
6. easy to install easy to use and does not require routine maintenance features.
7. xenon-arc lamp service life depends on the irradiance level average lamp life is 1600 hours. Lamp replacement easy, effective filters in order to maintain the necessary spectrum to provide protection.
|Inner Box Size (D×W×H)
|Outside Dimension (D×W×H)
|Temperature and Humidity Range
|Temperature and humidity uniformity
|± 2°C; ± 3%RH
|1~240min, interval is adjustable
|Xenon lamp light
|Xenon long-arc lamp, 1.8KW±10%, 290-800nm, 1000W/m2±200
|Sample spinning machine speed
|1~5r/ min (adjustable)
|Sample and xenon lamp distance
|Stainless Steel SUS304#
|Superfine heat insulation cotton
|Superfine glass fabric
|Single cycle, centrifugal fan
|Control and cooling system
|Germany KLOCKNER-MOELLER programmable controller
|Discharger for bad smell and harmful gas
|AC220V, three phase five wire, 5KW
1.Filtering screen viewing window;
|Security device for circuit break,
|High pressure of the compressure, high temperature alarm
1. United States filter drier, Italy solenoid valve
2. Multi-blade fan force air circulation, avoiding any corner, Xenon lamp aging box allows even distribution of temperature and humidity in the test area.
3. Circulating air return air design wind pressure wind speeds are in line with the standards and the opening moments the temperature and humidity stabilisation time.
4. Completely independent of the heating, cooling, humidification system can improve efficiency and reduce testing costs, increased life expectancy, reduced the failure rate
Operation Control System
1. heating: high quality NI-CR alloy fin type electric heater, no touch control.
2. humidification: stainless steel electric humidifier humidifier, contactless switch control mode.
3. cooling: cooling by heat exchangers, compressors, booster pump, blower and flow control valve. With air-cooled cooling inside the oven and Board temperature is controlled by automatic closed-loop temperature control instrument. High pressure blower fan to lamp directly air cooling, thus effective cooling tube Center.
4. air cycle device: built-in cycle duct through efficient long axis ventilation machine for effective of hot Exchange, makes box within fast achieved temperature dynamic of purpose, through improved air of drum culture flow, improve has air flow and the heater and air table cold device of hot exchange capacity, through out outlet can adjustable wind tied of regulation, to sharply improved has test box of temperature uniform sex.
5. Control adjustment method: balance conditioning method was used (BTHC), which in the case of cooling system in the continuous work, the system according to the set temperature by PID automatic calculation result output to control the output of the heater, and ultimately achieve a dynamic equilibrium.
Contact Person: Kelly