China Lab Test Machines manufacturer
Hai Da Labtester

Haida International Equipment CO.,LTD


Home ProductsVibration Testing Equipment

Electric Vibration Testing Equipment Vertical Extension Table Easy Operation

Electric Vibration Testing Equipment Vertical Extension Table Easy Operation

    • Electric Vibration Testing Equipment Vertical Extension Table Easy Operation
    • Electric Vibration Testing Equipment Vertical Extension Table Easy Operation
    • Electric Vibration Testing Equipment Vertical Extension Table Easy Operation
    • Electric Vibration Testing Equipment Vertical Extension Table Easy Operation
  • Electric Vibration Testing Equipment Vertical Extension Table Easy Operation

    Product Details:

    Place of Origin: China
    Brand Name: Haida
    Certification: ISO
    Model Number: HD-G826

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Price: Negotiable
    Packaging Details: each set protected with resin fiber and PP film, then put into Strong wooden case with operation man
    Delivery Time: 20 days after order confirmed
    Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability: 300 Sets per Month
    Contact Now
    Detailed Product Description
    Sine Force (peak): 30KN Shock Force (peak): 60KN
    Frequency Range: 5~2,600 Hz Displacement (continuous): 100 Mm
    Max. Velocity: 1.8 M/s Max. Acceleration: 75 G
    1st Order Resonant Frequency: 2,400 Hz
    High Light:

    vibration test system


    vibration table test equipment

    High Quality Transport Vibration Electrodynamics Type Vibration Testing Equipment




    Electro-dynamic Type Vibration Testing Equipement  Electric vibration testing machine vertical extension table in the vibration test, the test sample or fixture may be larger than the electric vibration table moving ring table, so it is necessary to expand the original table, the common method is to install an auxiliary table (extension table).When doing vibration tests, if some test samples require special installation, custom fixtures are required to meet the requirements of this test.In random vibration test, the vibration table itself is not too big problem, the problem is the control system.Because the signal analysis and calculation of random vibration test is complicated, it must be done by computer.




    Ultra mute work; The machine base uses the high quality material, installs conveniently, the operation is smooth, does not need to install the The, the control circuit digitization control and the display frequency, the PID adjusts the function, causes the equipment work to be more stable, reliable, sweeps the frequency and the fixed frequency operation way, adapts to the different profession test request To solve the interference of the strong electromagnetic field to the control circuit, and to increase the working time set, so that the test product reaches the accurate test time.



    Electro-dynamic Vibration Testing System Performance Data Sheet:


    Shaker (Model# EDM-2000)
    Sine force (peak) 30kN
    Shock force (peak) 60 kN
    Frequency range 5~2,600 Hz
    Displacement (continuous) 100 mm
    Max. Velocity 1.8 m/s
    Max. Acceleration 75 G
    Armature Diameter 445 mm
    1st order resonant frequency 2,400 Hz
    Allowable eccentric moment >500 Nxm
    Armature weight 40 kg
    HE/ST screw dimension M10 (metric)
    Axial vibration isolation frequency <3 Hz
    Max. Payload 500 kg
    Magnetic flux leakage ≤1 mT
    Dimensions (L×W×H, unpacked) 1,330x860x1,250 mm
    Weight (unpacked) 2,500 kg
    Installation Rubber mat (anchor bolts required)
    Power Amplifier (Model# VSA-H323A)
    Amplifier output 30 kVA
    SNR >65 dB
    Rated output voltage 120 Vrms
    Amplifier efficiency > 90%
    Dimensions (L×W×H, unpacked) 800x900x2,100 mm
    Weight (unpacked) 500 kg
    Blower (Model# PBL-W30)
    Air volume 0.46 m3/s
    Power 7.5 kW
    Air duct diameter 200 mm
    Air pressure 8.8kPa
    Installation Able to connect to ceiling (up to two 90 degree bends), max 20’ run
    Horizontal Slip Table (Model# 30ST-600M)
    Dimensions 600x600 mm
    Thickness 45 mm
    Frequency limit 2,000 Hz
    Effective mass 54 kg


    1. High pressure oil-film bearing is used for better uniformity.

    Vibration Controller and Accelerometer
    Vibration Controller VT-9008-4 4 Channel Vibration Controller with Sine and Self Calibration.
    Accelerometer EA-YD-181 100mV/g, Range: 50g, Working Freq.: 1-10kHz, Weight: 11gram, with 10ft low noise cable
    Other supported functions/accessories
    Environmental chambers Supported
    Mobile devices Customizable
    Insulation boards Customizable
    Fixture Customizable
    Working environment of the system
    Temperature range 0-40℃
    Humidity range 0~90% , no condensation
    Power requirements 380V/3ph/50Hz, 40kVA
    Compressed air pressure 0.6 Mpa


    How to use:

    1, the control manual to complete the procedure

    2, such as Operation error so that can not work, you can use the recovery method of the steps of the input, and then set a single group or other running steps.

    3, before use to press the external start switch, appears COO namely lets go, opens the key.

    4, Taiwan Body:

    1 The table body foot sleeve as far as possible fixed

    2 power supply on/work in the output line can not be unplugged

    3 Place the level as far as possible

    4 components can be changed, the line should not be changed or from the connection.

    5 The Taiwan body must not be all or part of the reorganization, only according to specifications for a single component and with the original confirmation password.

    5, the amplitude inside the code

    1. Do not adjust too large before or after the boot

    2) low-key amplitude of high amplitude modulation

    3 Control Panel Amplitude Knob placed in the middle position test items: placed to focus on the main point, reduce the left flat right.

    4 control Box: Can not be placed on the top or underground operation

    6, Inside Code:

    1) reset when running or operating incorrectly

    2) Control The Reset method step, each inside code only set one time to save can

    3 usually must use the internal code can not be set randomly

    7, Control Box:

    1) The connecting line of the body must be locked tightly after hanging

    2 the vibration direction switch and the output connection line are correspondence, can not connect the wrong

    8, testing: Non-special test should use full wave test

    9, the Taiwan body: can not produce the collision sound, the upper and lower center axis mutual touch will cause the spring steel piece rupture to be immediately shut down, amplitude modulation is adjusted small then turns on.

    10, other unknown:

    Do not arbitrarily change internal components and lines

    11, the reason is bad:

    1 The use of computer models can not be used for shaking table control

    2 can not reload the driver

    2, for the Ista-ia test, the operator to protect the sample, to prevent the test pieces slide out of the table;

    3, gear gearbox replacement regularly;

    4. Cut off all power when not working, keep clean; 5, non-staff can not operate at will

    Electro-dynamic Vibration Testing System Images
    Electric Vibration Testing Equipment Vertical Extension Table Easy Operation 0

    Contact Details
    Hai Da Labtester

    Contact Person: Mr. Liang

    Send your inquiry directly to us
    Hai Da Labtester
    6th Floor, Rongda Building, Yuanwubian Road, Nancheng District, Dongguan, Guangdong, China (Mainland)
    Mobile Site Privacy Policy China Good Quality Lab Test Machines Supplier. © 2015 - 2021 All Rights Reserved.