Product Details:
|
Usage: | Constant Temperature And Humidity Testing Machine | Temp. Range: | -70°C~150°C |
---|---|---|---|
Humid. Range: | 10~ 98 Percent R.H. | Temp. & Humid. Accuracy: | ± 0.3°C; ± 2 Percent R.H |
Temp. & Humid. Regularity: | ± 1°C; ± 3 Percent RH | Resolution: | 0.01°C, 0.1 Percent, P.I.D Control |
Heating Up: | -40°C ~ +100°C Within 45 Min | Heating Down: | 20°C~ -20°Cwithin 40min |
Interior Dimension(W×D×H): | 100×100×80cm | Exterior Dimension(W×D×H): | 145x190x135cm |
Interior Material: | Stainless Steel Plate(SUS304) | Exterior Material: | Stainless Steel Plate(SUS304) |
Insulation: | Rigid Foam | Display: | LCD |
Weight: | Approx. 600 Kg | Power: | AC220V±10 Percent 50/60Hz |
High Light: | environmental testing equipment,environmental lab testing equipment |
Electronic Power Chamber Programmable Cycle Air Temperature Humidity Chamber
Temperature and humidity chamber.pdf
Production introduce
Electronic Power Chamber Programmable Cycle Air Temperature Humidity Chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Performance
Temperature Range RT + 10 ℃ ~ 100 ℃ Humidity 80 ~ 98% R · H fluctuation / uniformity ≤ ± 0.5 ℃ / ± 2 ℃ temperature deviation +2%, - 3% R · H Heating time of about 20min at room temperature ~ 100 ℃ temperature control ± 1 ℃ ± 2%
Control System
Imported microcomputer temperature controller wet integrated controller (display directly percent humidity).
Accuracy range setting accuracy: temperature ± 0.1 ℃, humidity ± 0.1% R · H, indicating accuracy: temperature ± 0.1 ℃, temperature ± 0.1% R · H temperature and humidity sensors platinum platinum resistance · PT100Ω.
Heating system is completely independent system, electric heating nichrome heater.
Isolated external humidification systems, stainless steel boiler type shallow surface evaporative humidifier.
Circulatory system temperature low noise air conditioning motors, leafy centrifugal wind wheel.
Cooling System
1. fully enclosed cryogenic refrigeration compressor unit. Evaporative Condenser high temperature level both as an evaporator, a condenser and a low level.
2. To ensure the safe operation of the system, the system must be set high and low voltage control, overpressure, overload protection system. Meanwhile, in order to monitor system operation at high and low end of the table need to be provided with high and low pressure monitoring system operation.
3. The cooling capacity is adjusted by the shunt.
Curve record:
3 Under state machine downtime can be inserted at any time to export or upload U disk data, and can be guided by the file viewer or converted to EXCEL format were presented by software in the computer.
Meter equipped with a USB port, can be directly driven by micro printer port and print preview (optional).
Specifications
Temp/Humidity |
HD-E702-100-4 |
HD-E702-150-4 |
HD-E702-225-4 |
|
|
HD-E702-408-4 |
HD-E702-800-4 |
HD-E702-1000-4 |
|
Temp-only |
HD-E702-100T-4 |
HD-E702-150T-4 |
HD-E702-225T-4 |
|
|
HD-E702-408T-4 |
HD-E702-800T-4 |
HD-E702-1000T-4 |
|
Temperature Range: |
-40°C ~150°C |
|||
Cooling Capacity |
~ 2 kW at -20°C |
~ 2.5 kW at -20°C |
~ 4.5 kW at -20°C |
|
~ 5.5 kW at-20°C |
~ 8 kW at -20°C |
~ 8.5 kW at - -20°C |
||
Heating System |
~ 5 kW |
~ 5 kW |
~ 5.5 kW |
|
~6.5 kW |
~ 8.5 kW |
~ 9 kW |
||
Temperature Fluctuation: |
±0.5°C |
|||
Temperature Gradient: |
±0.5°C~±0.2°C |
|||
Heating Rate†: |
≥3℃ / min average ( Advance model 5 – 15 ℃ / min) |
|||
Cooling Rate†: |
≥1℃ / min average (Advance model 5 - 15℃ / min) |
|||
Humidity Range: |
10%~95%RH (Ref to Normal Humidity Range Diagramed) |
|||
Humidity Fluctuation: |
±1.5%RH~±2.0%RH |
|||
Humidity Gradient: |
±3%RH |
|||
Dimensions |
||||
Workspace dimensions |
500x400x500 HD-E702-100 |
600x500x500 HD-E702-150 |
750x500x600 HD-E702-225 |
|
|
850x650x800 HD-E702-800 |
1000x1000x800 HD-E702-800 |
1000x1000x1000 HD-E702-1000 |
|
Exterior dimensions |
1400x850x1050 |
1500x950x1050 |
1650x950x1150 |
|
|
1750x1050x1350 |
1900x1450x1350 |
1900x1450x1550 |
|
Site Requirements |
||||
Electrical Supply: |
208V 3Ø 60Hz or 230V 3Ø 60Hz (customer specific) |
|||
Humidity Water |
Distilled Water |
|||
Condensate Drain: |
1/2" hose connection (gravity drain) |
2. Performance
Get a performance evaluation to help provide the suitable chambers to you.
For better assurance of performance for your temperature and humidity cycling application, Haida can provide a guaranteed performance calculation based on your submitted requirements.
Please use these questions as below as a guide to define your test plan. You can then give this information to our lab consultant or email to us, for review by our lab consultant. A recommended model with appropriate refrigeration size will provide to you.
System & Performance Options
(Normal Humidity Range Diagramed)
view:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Our Services
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
1. Pre-service
24 Hours online service for your consult.
Help choose right model,and a series of service,person,advise.
2. Middle service
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax.
3. After sale service
--1 year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts
--Remote control technical consult
--Free installation DVD
--Maintenance plan
4,Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
5,Good Packaging:
Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!
Contact Person: Kelly