Tel:
China Lab Test Machines manufacturer
Hai Da Labtester

Haida International Equipment CO.,LTD

 

Home ProductsEnvironmental Test Chamber

Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C PID+SSR

Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C PID+SSR

    • Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C  PID+SSR
    • Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C  PID+SSR
    • Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C  PID+SSR
  • Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C  PID+SSR

    Product Details:

    Place of Origin: CHINA
    Brand Name: Haida
    Certification: CE , ISO
    Model Number: HD-E703

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Price: Negotiation
    Packaging Details: each set protected with resin fiber and PP film, then put into Strong wooden case with operation man
    Delivery Time: 20 days after order confirmed
    Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability: 300 Sets per Month
    Contact Now
    Detailed Product Description
    Control: PID Certificate: ISO9001: 2008
    Warranty Period: One Year Damper Device: Forced Air Drived Damper
    Cooling Method: Water Ambient Temperature: 0°~30°
    Refrigeration: Cascade Refrigeration System Preheating Temperature: Subzero 10.00°C~subzero 70.00°C
    Precooling Temperature: Subzero 10.00°C~subzero 70.00°C Temperature Uniformity: ±2.00°C
    High Light:

    environmental testing equipment

    ,

    environmental test chamber

     

                 Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C
     
     
    1.Product introduction
     
    Programmable subzero 10.00°C ~ subzero 70.00°C constant thermal shock test chamber is used to test the material structure or composite material, in an instant by the level very high temperatures and very low temperature environment can tolerate continuous, in order to test in the shortest time chemical changes or physical damage due to its thermal expansion and contraction caused by confirm the quality of the product. suitable objects include electrical and electronic components, automation components, communications components, auto parts, metals, chemicals, plastics and other industries and defense industry, aerospace, military industry, BGA, PCB group pull, electronic chip IC the semiconductor ceramic material and physical sacrifice of the polymer changes.
     
     
    2.product usage
     
    Programmable subzero 10.00°C ~ subzero 70.00°C constant thermal shock test chamber to test or composite material structure, in an instant by extremely high temperature and low temperature under continuous environment can endure degree, in order to in the shortest possible time to test its heat bilges cold shrink caused by chemical or physical damage.Used in electrical and electronic components, automation, communication components, auto parts, metal parts, chemical materials, plastic and other industries, the defense industry, aerospace, industrial, BGA, PCB base, electronic chip IC, semiconductor ceramics and physical shape change of polymer material, to test the material to pull over and over again and the product in high/low temperature heat bilges cold shrink output of chemical or physical damage, can confirm the quality of products, from precision IC to heavy mechanical components, there is no ideal testing tools do not need it.
     
     
    3.product feature
     
    · Product contour artistic, structure reasonable, the craft is advanced, well-selected materials, has simple and convenient operation and reliable equipment performance.
    · Equipment is divided into high temperature box, low temperature box, test box of three parts, adopt unique thermal structures and heat storage effect, perfectly still, the object under test in testing the application of hot and cold switching road will be cold wind, hot hot and cold impact test temperature import test area.
    · Adopting the most advanced measuring device, large color LCD controller USES a human-machine touch dialog type LCD human-machine interface controller, simple operation, learn easy, stable and reliable, the English display the complete system operation conditions, implement and setting process curve.
    · With 96 test specification independent setting, impact time 999 hours 59 minutes, cycle 1 ~ 999 times can be set, which can realize automatic machine operation, the largest degree of automation, reduce workload, operating personnel can run automatically start, stop work at any time;
    · Box on the left side of the test hole with a diameter of 50 mm, for plus the power load wiring test components.
    · Can independently set high temperature, low temperature, and the function of cold and hot shock in three different conditions, and perform in cold and hot shock condition, can choose two slot or three slot and cold shock, thermal shock impact function, has the function of the high and low temperature testing machine.
    · Have fully automatic, high precision system circuit, action, any part is entirely P.L.C lock handle, all adopt the P.I.D automatic routing control, temperature control precision is high.
    · Advanced science and air circulation loop design, make indoor temperature uniformity, avoid any corner;Complete security protection device, to avoid any possible security hidden danger, ensure long-term reliability of the equipment
     
     
    4.Operating procedures
    In general, high and low temperature impact test chamber operations are divided into five choices: preprocessing, initial testing, testing, recovery, and finally detected. HSBC Branch Hengtai below to share with everyone what detailed process content:
    · Conditioning: The test sample is placed in the test under normal atmospheric conditions until it reaches a stable temperature.
    · Initial test: the test sample and control standards, to meet the requirements directly into the high and low temperature impact test chamber can be.
    ·Test:
    ··· Test samples should be placed in a standard test chamber, and the chamber (room) temperature rise within a specified point, to maintain a certain period of time to the test sample to a temperature stable, long time to have prevail.
    ··· high-temperature phase, within 5min to convert the test sample is adjusted to a low-temperature chamber (chamber of -55 ℃), the holding 1h or until the test sample to reach temperature stability, are subject to a long time.
    ··· low temperature phase, within 5min to convert the test sample is adjusted to a temperature chamber (chamber of 70 ℃), the holding 1h or until the test sample to reach temperature stability, are subject to a long time.
    ··· the protocol described above was repeated to complete three cycles. It may be slightly error according to sample size and the size of the space and time.
    · Restore: Test samples taken from the test chamber shall be restored under normal atmospheric conditions the test until the test sample reaches temperature stabilization.
    · Last test: the extent of the damage control standards and other methods of assessment of test results.

     

    Model

     

    Interal Dimension:

    (W×H×D)50×40×40 cm

    Structure:

    Two chambers design(the hot chamber or the cold chamber)

    Damper device:

    Forced air drived damper

    Interior material:

    SUS# Stainless steel plate

    Exterior material:

    SUS# Stainless steel plate

    Basket material:

    SUS# Stainless steel plate

    Refrigeration:

    Cascade refrigeration system

    Cooling method:

    Water

    Ambient temperature:

    0°~30°

    Preheating temperature:

    60.00°C~200.00°C

    Precooling temperature:

    subzero 10.00°C~subzero 70.00°C

    H.T. Shocking:

    above freezing 60.00°C~150.00°C

    L.T. Shocking:

    subzero 10.00°C~subzero 65.00°C

    Temperature uniformity:

    ±2.00°C

    Simulated load ic

    5.0kg

    HT IN-Zone

    subzero 65.00°C~above freezing 150.00°C/5min

    LT IN-Zone

    above freezing 150.00°C -subzero 65.00°C

    Preheating time:

    30MIN

    Precooling time:

    60MIN

    Senor:

    T×4

    Controller:

    OYO8226

    Setting range:

    Temperature:subzero 100.00°C~above freezing 200.00°C/TIME:OHIM~999H/CYCLE:0 ~9999

    Resolution:

    Temperature:0.1°C

    Output mode:

    PID+SSR(control method)

    Power(K.W)

    20

     

     

     

                                 Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C  PID+SSR 0
                       
     
                              Programmable Constant Thermal Shock Environmental Test Chamber 10.00°C ~ 70.00°C  PID+SSR 1                                       

      

         

     

    Packaging & Shipping

    Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

    -02.jpg


     

     

     

     

    Our Services

    If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

    1. Pre-service

    24 Hours online service for your consult.

    Help choose right model,and a series of service,person,advise.

    2. Middle service

    --Give you best offer

    --Provide discount for many sets order

    --Do customer's request:

    --Choose payment term you convienent.

    --Promptly production and delivery,inform you in time.

    --Can provide invoice value as you like to decrease your tax.

    3. After sale service

    --1 year warranty service and all life maintenance.

    --Technical Egineer are avalible for oversea trainning.

    --Free change for some parts

    --Remote control technical consult

    --Free installation DVD

    --Maintenance plan

    4,Commitment:

    We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

    5,Good Packaging:

    Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

     1.jpg

     

    FAQ

    Why choose us?

    1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

    2.Excellent After sale Service:
    18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.

    3.Commitment:
    We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

    4.Good Packaging:

    Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

     

    How to Contact Us?

    Please Send your inquiry Details in the below for our quotation,Click "Send" Now!

     

     

    Contact Details
    Hai Da Labtester

    Contact Person: Mr. Liang

    Send your inquiry directly to us
    Hai Da Labtester
    6th Floor, Rongda Building, Yuanwubian Road, Nancheng District, Dongguan, Guangdong, China (Mainland)
    Tel:86-0769-89201068
    Mobile Site Privacy Policy China Good Quality Lab Test Machines Supplier. © 2015 - 2020 labtestmachines.com. All Rights Reserved.