Tel:
China Lab Test Machines manufacturer
Hai Da Labtester

Haida International Equipment CO.,LTD

 

Home ProductsISTA Packaging Testing

ASTM D6055 ISTA Packaging Testing Equipment For Clamp Force Testing​

ASTM D6055 ISTA Packaging Testing Equipment For Clamp Force Testing​

ASTM D6055 ISTA Packaging Testing Equipment For Clamp Force Testing​
ASTM D6055 ISTA Packaging Testing Equipment For Clamp Force Testing​

Product Details:

Place of Origin: China
Brand Name: Haida
Certification: CE,,ISO
Model Number: HD-A534

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotiation
Packaging Details: each set protected with resin fiber and PP film, then put into Strong wooden case with operation man
Delivery Time: 20 days after order confirmed
Payment Terms: L/C, T/T, D/A, D/P, Western Union, MoneyGram
Supply Ability: 300 Sets per Month
Contact Now
Detailed Product Description
Maximum Specimen Weight: 600kg Warranty Period: 1 Year
Clamping Pressure Force: 400-3000Lb (adjustable) Clamping Plate Size: Height 48inch X Depth 48inch
Clamping Plate Adjustable Height: 0~1000mm Clamping Plate Adjustable Width: 200~2000mm
Motor: Panasonic Servo Motor Accuracy: Within ±5%
Clamping Force Rate: 0.25-2.5mm/sec (according ISTA 6- SAMS CLUB) Force Corrector: It Displays Force Value And Is Used To Calibrate Clamping Force.
Calibration Accuracy: ±1% F.S Device Width: Less Than 2.5m
Power: 220v/ 60Hz All Weight: 2000kg
High Light:

ista package testing

,

package testing equipment

 

ASTM D6055 ISTA Packaging Testing Equipment For Clamp Force Testing​

 

ASTM D6055 ISTA Packaging Testing Equipment For Clamp Force Testing​ 0HD-A535 Clamp force test machine.pdf

 

 

Safety protection

Overload protection, overvoltage protection & limited position protection device  

 

The usage:

Specimen shape

Parallelepiped transport package

Max. Specimen weight

500kg

Clamping pressure force

According to the transport diagram on the test sample, the operator can add 400~3000Lb (adjustable) pressure force on the corresponding surface

Clamping board size

H*D 48*48inch

Clamping board adjustable height

0~500mm

Elevation speed

10~300mm/min optional

Clamping board expansion width

200~2000mm

Baseboard dimension

W*D 1500*1500mm

Clamping board requirement

Make sure the two clamping board are flat, parallel and non-deform under the work condition(2000Pound) and clamp board and land are vertical. Clamping board thickness no less than 25mm.

Corrector of force

Force value display used to correct clamping force

Force precision

National standard 1.6 level

Operation

Manual operating rod simulates fork truck actual operating actions such as clamping control, opening, lifting up, lifting down or automatic switching mode operation (clamping board thickness no less than 25mm)

Device width

Less than 2.5m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                    

The  Parameters

Clamping force

1T

color

optional

Resolution

1/100,000

Test Space(L x W x H)

100x 100 x 100cm

Test Speed

10±3mm/min

Weight

 around 300kg

Power

1#, 220V/50HZ

 

  

Clamp Compression Testing Method of Large Products 

 1.Before placing the packaged product between platens, verify that the clamp force using the clamp indicator. The indicator should be placed between the axes of the platen articulation points approximately 1/2 way up the platens.

 2.Each time the product is clamped, the force should be applied for a minimum of 15 seconds and not to exceed 1 minute.

 3. Apply the clamp force on the sample with the platens resting on the floor and the front edge of the platens flush with the front of the package (see flush platen photo 4). If the package is too large for the clamps to be flush to front edge (i.e., large refrigerator, tractor etc.), clamp as close to the edge as possible.

 4. Clamp the product a total of 10 times in the flush orientation.

 5. Apply the clamp force on the packaged product with the platens in a 6×6 inch(15.2x15.2cm) offset position(see fig 5 ). Both the horizontal and vertical offset dimensions are measured at the front bottom corner of the platen. If the package is too large for the clamp to be positioned 6-inches from the front edge (i.e., large refrigerator, tractor etc.), clamp as close to this position as possible.

    1)Exception number 1: for large products with an obvious, visible external skid(see fig 6), offset clamp testing is not conducted if the product does not extend beyond any part of the skid and there is some form of handling graphic or note that indicates to clamp only from the skid. If there is no graphic or not indicating this or there is some overhang beyond the skid, then the entire clamp test protocol is conducted.

    2) Exception number 2: If the product height, when placed in its normal shipping orientation, is ≤ 12 inches, the 6 x6 inch offset testing is not conducted.

 6. Clamp the product a total of 10 times with the clamp in the 6 x6 inch offset position.

 7. Repeat step 5.2.5 except with a 2 x6 inch offset clamp position. The 2 x6 inch offset is similar to the 6 x6 inch offset except the platens are oriented such that they are 2-inches from the floor and 6-inches back from the package’s front edge. If the package is too large for the clamps to be positioned 2-inches from the front edge (i.e., large refrigerator, tractor etc.), clamp as close to this position as possible.

 8. Repeat flush and offset clamping on all other sides of the product that are indicated in the handling graphics as acceptable for clamp handling.

According to verdict standards, if there is one item failed the test, then put forward the “Test Failure Handling Sheet

 

Clamping force:

50-3000kg

Size of the clamping board:

1200 by 1200mm

Maximum clamping space:

1200 by 1200 by 1200mm

Minimum clamping space:

400 by 1200 by 1200mm

Clamping speed:

5-50mm/min

Up-down space:

100-600mm, adjustable, can be customized

Dimension: 3

810 by 1900 by 2100

Weight:

800kg

Power:

380v/ 50Hz

Control system:

PLC programmed control

 

                                      ASTM D6055 ISTA Packaging Testing Equipment For Clamp Force Testing​ 1

                        

 

Contact Details
Hai Da Labtester

Contact Person: Mr. Liang

Send your inquiry directly to us
Hai Da Labtester
6th Floor, Rongda Building, Yuanwubian Road, Nancheng District, Dongguan, Guangdong, China (Mainland)
Tel:86-0769-89201068
Mobile Site Privacy Policy China Good Quality Lab Test Machines Supplier. © 2015 - 2020 labtestmachines.com. All Rights Reserved.