China Lab Test Machines manufacturer
Hai Da Labtester

Haida International Equipment CO.,LTD


Home ProductsEnvironmental Test Chamber

Rzl -14 / 16 Refractories Thermal Shock Tester Electronic Air Cylinder

Rzl -14 / 16 Refractories Thermal Shock Tester Electronic Air Cylinder

    • Rzl -14 / 16 Refractories Thermal Shock Tester Electronic Air Cylinder
    • Rzl -14 / 16 Refractories Thermal Shock Tester Electronic Air Cylinder
    • Rzl -14 / 16 Refractories Thermal Shock Tester Electronic Air Cylinder
  • Rzl -14 / 16 Refractories Thermal Shock Tester Electronic Air Cylinder

    Product Details:

    Place of Origin: China
    Brand Name: Haida
    Certification: CE,,ISO
    Model Number: HD-E703

    Payment & Shipping Terms:

    Minimum Order Quantity: 1
    Price: Negotiation
    Packaging Details: Strong Wooden Case
    Delivery Time: 15 Days After Order
    Payment Terms: L/C, T/T, D/A, D/P, Western Union, MoneyGram
    Supply Ability: 75 Piece / Pieces Per Month
    Contact Now
    Detailed Product Description
    High Temp. Exposure Range*1: +60~ To +200°C Low Temp. Exposure Range*1: -65to 0 °C
    Temp. Fluctuation *2: ±1.8°C Temp. Heat Up Time*3: Ambient Temp. To +200°C Within 30min
    Temp. Recovery Time: Within 10 Min. External Material: Cold-rolled Rust-proofed Steel Plate
    Air Circulator: Sirocco Fan Cooling Water Supply Pressure*6: 02~0.4Mpa
    Operating Cooling Water Temp. Range: +18 To 23 °C
    High Light:

    environmental testing equipment


    environmental lab testing equipment

    Rzl -14 / 16 Refractories  Thermal Shock Tester Electronic Air Cylinder 


    Thermal Shock Chamber.pdf


    Rzl -14 / 16 Refractories Thermal Shock Tester Electronic Air Cylinder 0



    Refractories Thermal Shock Testing Chamber adpots low temperature and high temperature accumulation slot,after open damper, it will take hot and cold temperature in stored groove import test slots so as to achieve rapid temperature concussion effect,with  balance temperature control system (BTC) , special design of air circulation system, the way to control SSR in P.I.D.make the system add heat is equal to the quantity of heat loss.

    Technical performance 


    1. Refers to the water-cooled :at room temperature +25°C ,no-load
    2. Temperature fluctuations degrees: ±0.3 °C
    3. Temperature uniformity: ± 0.5 °C
    4. Strike response time:-40°C~+150°C, less than 5min (high and low temperature impact time each for 30min above)



    Structural features


    1. The inside case material: mirror stainless steel (SUS# 304)
    2. Outside the box material: wiredrawing stainless steel plate(SUS# 304)
    3. Heat preservation material: high temperature slot: aluminium silicate heat insulation cotton, low temperature slot, high density PU foaming
    4. Heater: Stacked fins radiator pipe stainless steel electric heaters.
    5. Supply air circulation system: stainless steel lengthen axis, wings type fan blade. The special design of fan forced blowing wind circulation system.
    6. Door: monolithic door, left open.
    7. The refrigeration system
    A. Compressor:French "taikang" original importde fully closed with high efficiency complex superposition.
    B. Cooling medium: environmental R - 507 / R - 23.
    C. Condenser: water-cooled shell condenser.
    D. Evaporator: fins style many sections automatic load capacity adjustment.
    E. Accessories: desiccant, oil separator, refrigerant flow window, the repair of thinning ,high-pressure protection switch
    F. Expansion system: capacity control of the refrigeration system (capillary)
    G. Refrigeration auxiliary parts:




    the original imported color LCD touch type controller, Chinese and English display, large LCD controller with adjustable backlighting function, with 99 group procedural memory control function and PID control function, Data record; USB interface functions (will be recorded data curve records, do not need special computer records),each group of 0 ~ 99Hour59Min






    Two-zone test by means of damper switching

    Three-zone chamber






    Test area

    High temp. exposure range*1

    +60~ to +200°C

    Low temp. exposure range*1

    -65to 0 °C

    Temp. fluctuation *2


    Hot chamber

    Pre-heat upper limit


    Temp. heat up time*3

    Ambient temp. to +200°C within 30min

    Cold chamber

    Pre-cool lower limit


    Temp. pull down time*3

    Ambient temp. to -65°C within 70min

    Temp. recovery (2-zone)

    Recovery conditions

    Two-zone: High temp. exposure +125°C 30 min, Low temp. exposure -40°C 30 min; Specimen 6.5 kg (specimen basket 1.5kg) 

    Temp. recovery time

    Within 10 min.


    External material

    Cold-rolled rust-proofed steel plate

    Test area material

    SUS304 stainless steel


    Manually operated door with unlock button


    Strip wire heater

    Refrigeration unit


    Mechanical cascade refrigeration system


    Hermetically sealed scroll compressor

    Expansion mechanism

    Electronic expansion valve


    High temp side:R404A, Low temp side R23


    Stainless steel welded plate heat exchanger

    Air circulator

    Sirocco fan

    Damper driving unit

    Air cylinder


    Cable port with diameter 100mm on the left side (right side and tailor made diameter size are available as options), specimen power supply control terminal

    Inside dimensions (W x H x D)

    350 x 400 x 350

    500 x 450 x 450


    Test area capacity




    Test area load

    5 kg

    10 kg


    Outside dimensions (W x H x D)

    1230 x 1830 x 1270

    1380 x 1980 x 1370







    Utility requirements


    Allowable ambient conditions


    Power supply

    AC380V, 50/60Hz, three phase , 30A

    Cooling water supply pressure*6


    Cooling water supply rate*6

    8m³ /h

    Operating cooling water temp. range

    +18 to 23 °C

    Noise Level

    70 dB or lower


    Our Services


    If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

    1. Pre-service

    24 Hours online service for your consult.

    Help choose right model,and a series of service,person,advise.

    2. Middle service

    --Give you best offer

    --Provide discount for many sets order

    --Do customer's request:

    --Choose payment term you convienent.

    --Promptly production and delivery,inform you in time.

    --Can provide invoice value as you like to decrease your tax.

    3. After sale service

    --1 year warranty service and all life maintenance.

    --Technical Egineer are avalible for oversea trainning.

    --Free change for some parts

    --Remote control technical consult

    --Free installation DVD

    --Maintenance plan


    We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

    5,Good Packaging:

    Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.




    Q:Are your company a trading one or a factory?

    A:Factory + trade (integration),More than 13 years focusing on test equipment field,6 years exporting experience.

    Q:After an order is placed, when to deliver?

    A:Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days.

    Please be aware that our production lead times depend on specific items and item quantities.

    Q:What about the warranty with after - sales services?

    A:The testing machine is guaranteed for 12 months by HAIDA,we can help you to repair

    your problem controller freely,even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.

    Q:What about the product' services and quality?

    A:Each equiopment must be carried out 100% quality examination and test when shipping and delivery goods. Product use training, each of our product provide video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.


    Contact Details
    Hai Da Labtester

    Contact Person: Mr. Liang

    Send your inquiry directly to us
    Hai Da Labtester
    6th Floor, Rongda Building, Yuanwubian Road, Nancheng District, Dongguan, Guangdong, China (Mainland)
    Mobile Site Privacy Policy China Good Quality Lab Test Machines Supplier. © 2015 - 2021 All Rights Reserved.