Home ProductsEnvironmental Test Chamber

CE certificated Professional Hot and Cold Temperature Shock Environmental Simulate Test Chamber

Certification
China Hai Da Labtester certification
China Hai Da Labtester certification
Customer Reviews
Yes we received the machine last week. This Machine was nice, and thank the after-sales serives, was very professional.

—— Peter Maas

The melt flow tester is working very good. The delivery was more faster than expect, your after-sales servies team memembers were nice, and the technical support was perfect.

—— Steve Hubbard

I'm Online Chat Now

CE certificated Professional Hot and Cold Temperature Shock Environmental Simulate Test Chamber

CE certificated Professional Hot and Cold Temperature Shock Environmental  Simulate Test Chamber
CE certificated Professional Hot and Cold Temperature Shock Environmental  Simulate Test Chamber CE certificated Professional Hot and Cold Temperature Shock Environmental  Simulate Test Chamber CE certificated Professional Hot and Cold Temperature Shock Environmental  Simulate Test Chamber

Large Image :  CE certificated Professional Hot and Cold Temperature Shock Environmental Simulate Test Chamber

Product Details:
Place of Origin: China
Brand Name: Haida
Certification: CE,,ISO
Model Number: HD-E703
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiation
Packaging Details: each set protected with resin fiber and PP film, then put into Strong wooden case with operation man
Delivery Time: 20 days after order confirmed
Payment Terms: L/C, T/T, D/A, D/P, Western Union, MoneyGram
Supply Ability: 300 Sets per Month

CE certificated Professional Hot and Cold Temperature Shock Environmental Simulate Test Chamber

Description
Usage: Hot And Cold Temperature Shock Environmental Simulate Test Chamber High Temp. Exposure Range*1: +60~ To +200°C
Low Temp. Exposure Range*1: -65to 0 °C Temp. Fluctuation *2: ±1.8°C
Pre-heat Upper Limit: +200°C Temp. Heat Up Time*3: Ambient Temp. To +200°C Within 30min
Pre-cool Lower Limit: -65°C Temp. Pull Down Time*3: Ambient Temp. To -65°C Within 70min
Temp. Recovery Time: Within 10 Min. External Material: Cold-rolled Rust-proofed Steel Plate
Test Area Material: SUS304 Stainless Steel Cooler: Stainless Steel Welded Plate Heat Exchanger
Air Circulator: Sirocco Fan Damper Driving Unit: Air Cylinder
Allowable Ambient Conditions: +5~30°C Power Supply: AC380V, 50/60Hz, Three Phase , 30A
Cooling Water Supply Pressure*6: 02~0.4Mpa Cooling Water Supply Rate*6: 8m³ /h
Operating Cooling Water Temp. Range: +18 To 23 °C Noise Level: 70 DB Or Lower
High Light:

environmental test chamber

,

environmental lab testing equipment

CE certificated Professional Hot and Cold Temperature Shock Environmental  Simulate Test Chamber

 

 

1. Description:

CE certificated Professional Hot and Cold Temperature Shock Environmental  Simulate Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Application objects, including metal, plastic, rubber, electronics and other materials can be used as a basis to improve their products or reference.

 

 

2. Specifications of CE certificated Professional Hot and Cold Temperature Shock Environmental  Simulate Test Chamber:

 

System

Two-zone test by means of damper switching

Three-zone chamber

Model

HD-E703-50A/HD-E703-50W

HD-E703-100A/HD-E703-100W

Customized

Performance

Test area

High temp. exposure range*1

+60~ to +200°C

Low temp. exposure range*1

-65to 0 °C

Temp. fluctuation *2

±1.8°C

Hot chamber

Pre-heat upper limit

+200°C

Temp. heat up time*3

Ambient temp. to +200°C within 30min

Cold chamber

Pre-cool lower limit

-65°C

Temp. pull down time*3

Ambient temp. to -65°C within 70min

Temp. recovery (2-zone)

Recovery conditions

Two-zone: High temp. exposure +125°C 30 min, Low temp. exposure -40°C 30 min; Specimen 6.5 kg (specimen basket 1.5kg) 

Temp. recovery time

Within 10 min.

Construction

External material

Cold-rolled rust-proofed steel plate

Test area material

SUS304 stainless steel

Door*4

Manually operated door with unlock button

Heater

Strip wire heater

Refrigeration unit

System*5

Mechanical cascade refrigeration system

Compressor

Hermetically sealed scroll compressor

Expansion mechanism

Electronic expansion valve

Refrigerant

High temp side:R404A, Low temp side R23

Cooler

Stainless steel welded plate heat exchanger

Air circulator

Sirocco fan

Damper driving unit

Air cylinder

Fittings

Cable port with diameter 100mm on the left side (right side and tailor made diameter size are available as options), specimen power supply control terminal

Inside dimensions (W x H x D)

350 x 400 x 350

500 x 450 x 450

Customized

Test area capacity

50L

100L

Customized

Test area load

5 kg

10 kg

Customized

Outside dimensions (W x H x D)

1230 x 1830 x 1270

1380 x 1980 x 1370

Customized

Weight

800kg

1100kg

N/A

 

Utility requirements

 

Allowable ambient conditions

+5~30°C

Power supply

AC380V, 50/60Hz, three phase , 30A

Cooling water supply pressure*6

02~0.4Mpa

Cooling water supply rate*6

8m³ /h

Operating cooling water temp. range

+18 to 23 °C

Noise Level

70 dB or lower

 
 

Notes

 

1. If the high-temp exposure range lower limit + 60°C is required or the low temp exposure range lower limit -60°C, please select the “ambient-temperature exposure” option

 

2. If the temp fluctuation need to below ±1.8°C please select the “Low temp fluctuation package”

 

3. Temperature heat-up/pull down time are applicable only during independent chamber operation

 

4. If the automatically operated sliding door required, please select the “Automatically door package”

 

5. Air-cooled condenser / Water-cooled condenser both available

 

6. Apply on water-cooled condenser only

 

 

3. Safety Devices of CE certificated Professional Hot and Cold Temperature Shock Environmental  Simulate Test Chamber :

  1. Hot chamber overheat protection switch
  2. Cold chamber overheat protection switch
  3. Air circulator overload alarm
  4. Refrigerator high/low pressure protector
  5. Compressor temperature switch
  6. Air pressure switch
  7. Fuse
  8. Water suspension relay ( water-cooled specification only)
  9. Compressor circuit breaker
  10. Heater circuit breaker
  11. Test area overheat/overcool protector
  12. Air purge valve

 

Operation and settings simplified by the use of a touch-screen LCD display (instructions displayed on-screen). At-aglance confirmation of test patterns, test area temperatures, temperature cycles, and trend graph displays.

 

Setting

Interactive key input by touch panel

Display

LCD (5.7 inches)

Temperature control function

Test area: exposure temp.

Hot chamber: pre-heating temp.

Cold chamber: pre-cooling temp.

PID control

Preset temperature range

High temperature: 60 to200’C

Low temperature: -78 to 0’C

Setting resolution

1’C

Input

Thermocouple type T (Copper/Copper-Nickel)

Setting and indication ranges

Preset time: 0 min. to 99 hours and 59 min.

Preset cycle: 1 to 9,999 cycles

Accessory function

Timer preset

Overheat/ overcool protection

Power failure/ recovery selection

Temperature recovery time setting

Program memory

Automatic power shut-off

Programmed time display

Test completion mode selection

Trend graph

Alarm history display

Sensor calibration

RS-232/ USB communication

 

 

Packaging & Shipping

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

 

Our Services

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

1. Pre-service

24 Hours online service for your consult.

Help choose right model,and a series of service,person,advise.

2. Middle service

--Give you best offer

--Provide discount for many sets order

--Do customer's request:

--Choose payment term you convienent.

--Promptly production and delivery,inform you in time.

--Can provide invoice value as you like to decrease your tax.

3. After sale service

--1 year warranty service and all life maintenance.

--Technical Egineer are avalible for oversea trainning.

--Free change for some parts

--Remote control technical consult

--Free installation DVD

--Maintenance plan

4,Commitment:

We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

5,Good Packaging:

Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

 

FAQ

Why choose us?

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.

3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

4.Good Packaging:

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

How to Contact Us?

Please Send your inquiry Details in the below for our quotation,Click "Send" Now!

 

Contact Details
Hai Da Labtester

Contact Person: Kelly

Send your inquiry directly to us (0 / 3000)