Product Details:
|
Arm Radius: | 300mm, 400mm, 600mm, 800mm, 1000mm, 1200mm Or 1500mm | Rotating Table: | Speed Is Adjustable |
---|---|---|---|
Flow Rate: | 0.07L/min (IPX3,4), 0.6+/-0.5L/min (IPX4K) | Nozzle Distance: | 50mm |
Nozzle Diameter: | 0.4mm | Power: | 1 Phase, 220V, 5KW |
Weight: | Approx.350kg | Specimen Rotative Speed: | 1-3r/min (Adjustable) |
High Light: | ip testing equipment,ingress protection testing |
IEC WATER IP Test Ingress Protection Standards IP Test Equipment
IEC WATER IP Testing Equipment Ingress Protection Standards 50mm Nozzle distance
HD-E706-1 Test Probe IP1X~4X.pdf
HD-E706 Dust Test Chamber - IP5X&6X.pdf
HD-E710-4 Water Inmmersion Test Chamber - IPx7&8.p...
Description:
IEC WATER IP Test Ingress Protection Standards IP Test Equipment is designed and manufactured to meet the requirements of GB4208 and IEC60529. It is intended for determining the degree of protection against harmful deposits of dust (IP5X & IP6X). Dust protected enclosures to numeral 5 allow a limited quantity of dust to penetrate under certain conditions. Dust-tight enclosures to numeral 6 do not allow any dust to penetrate.
Features:
* Micaceous heater in dust circulatory channel can avoid the dust coagulation.
* Heating time presettable.
* Special dust exit makes dust replacement more convenient.
* Vacuum pump and vacuum pipe are available as option.
* Flux control of vacuum pump: 60~600 L/h.
* Three security system.
Parameters
Model |
HD-E712 |
Studio size |
(D×W×H)80 ×130 ×100cm |
Swing pipe diameter |
0.4m, 0.6m, 0.8m, 1.0m (according to the size of the measured object to select the swing pipe size) |
Pendulum tube angle |
60 degrees ,vertical ± 90 and 180 degrees |
Orifice |
The removable design, pinhole 0.4mm, specially designed nozzle, spray rain rain water pressure 50-150kpa |
Testing temperature |
Room temperature |
Specimen rotative speed |
1-3r/min (Adjustable) |
Power |
1 phase, 220V, 5KW |
Weight |
approx.350kg |
Application
IEC WATER IP Test Ingress Protection Standards IP Test Equipment is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray. This test is used to meet the requirements of IPX3 and IPX4 in IEC 60529. In the test described in IPX3 and IPX4 with an oscillating tube, the specimen is placed in the center point of the semicircle defined by the oscillating tube. It is then subjected to a spray of water at a defined pressure to test for leakage. The oscillating tube will have spray holes over 120 of the tube for IPX3 and over the full 180 for IPX4. In IPX3 the tube will oscillate to 60 either side of the vertical. For IPX4 the tube travels through an angle of almost 360. The specimen needs to be placed within 200mm of the tube. For this reason different size tubes are needed to test different size specimens
IPX Material Waterproof / Rain Spray / Water Mist Spray / Lamp Rain Test Chamber view:
FEATURES:
1. Flexible positioning and electric trolley. It is easy to fix and achieve the changeable value of speed.
2. The height of trolley is relatively low so that is easy to fix the specimen; the strong impact resistance board can guarantee the fastness of the structure.
3. The trolley can be adjusted to be horizontal in order to fix the specimen for customer. The angle adjustment is driven by air cylinder which is flexible and convenient.
4. In order to keep the test staff completely safe, the tester is with remote control function.
5. Before testing, the customer only needs to fix the tester on the ground when stalling it, no other complicated operation.
After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!
Contact Person: Kelly