Send Message
Home News

company news about Talking about the reference for purchasing the tensile tester

Certification
China Hai Da Labtester certification
China Hai Da Labtester certification
Customer Reviews
Yes we received the machine last week. This Machine was nice, and thank the after-sales serives, was very professional.

—— Peter Maas

The melt flow tester is working very good. The delivery was more faster than expect, your after-sales servies team memembers were nice, and the technical support was perfect.

—— Steve Hubbard

I'm Online Chat Now
Company News
Talking about the reference for purchasing the tensile tester
Latest company news about Talking about the reference for purchasing the tensile tester

Talking about the reference for purchasing the tensile tester

 

There are many purchasing departments of enterprises that may not know how to choose when buying a tensile tester, and how much capacity to choose? Single column or double column? Touch screen control or computer control? In fact, how to buy a tensile machine should start from many aspects:

latest company news about Talking about the reference for purchasing the tensile tester  0

 

1. The tension range (maximum tensile strength) of the test material should be considered.

The difference in the tension range of the test material will determine the size of the sensor and the structure of the tensile tester, but this has little impact on the price (except for the two-column type). For general flexible packaging manufacturers, a maximum pulling force of 200 Newtons is sufficient. Therefore, a single column type should be used. Ordinary, single-column type is used for pulling force below 5KN, and double-column type should be used for maximum force exceeding 5KN. (If you don't know, you can contact customer service)

 

2.Select the appropriate maximum stroke according to the test needs
 
The maximum stroke is usually called the distance between the upper and lower clamps (test stroke) + upper clamp height + lower clamp height + sensor height. Because different fixtures are selected for different test materials, the fixture can be selected to know the specific test stroke. Different deformations of the material require different test strokes. If the material is deformed by 600mm, the test stroke of 750mm-800mm should be considered. Because different materials are tested, different test standards should be used. Different test standards require different gauge distances.
 
Taking the performance and requirements of the flexible packaging film to be tested as an example, the stroke can be 600-800mm. If the elongation of the material exceeds 1000%, the stroke can be 1000 or 1200mm.
Pub Time : 2020-03-16 17:31:25 >> News list
Contact Details
Hai Da Labtester

Contact Person: Miss. Lisa

Tel: +86 13602361535

Fax: 86-0769-89280809

Send your inquiry directly to us (0 / 3000)